-PDF Download- Use Of Shredded Automobile Scrap For Copper Cementation EBOOK

Use of Shredded Automobile Scrap for Copper Cementation

Author: W. Lyman Staker

Publisher:

Published: 1976

Total Pages: 22

ISBN-13:

The Bureau of Mines investigated the use of shredded automobile scrap for copper cementation. Air agitation was used to improve the cementation rate and prevent excessive buildup of copper on the iron. The pieces of scrap were too large to be properly evaluated in the laboratory; therefore, a pilot scale test unit was constructed and the process tested at field locations. Pregnant solution was obtained from industrial leaching operations, processed in the test unit and the barren solution and cement copper were returned to the plan process stream.

Copper Cementation Using Automobile Scrap in a Rotating Drum

Author: Karl C. Dean

Publisher:

Published: 1968

Total Pages: 20

ISBN-13:

DOWNLOAD EBOOK →

The Bureau of Mines studied the precipitation of copper from dilute acidic sulfate solutions using shredded automobile scrap in a rotary drum. The tests established that the scrap in the rotary drum precipitated copper faster and more completely than shredded, detinned, tinplate scrap in a launder, with comparable iron consumption. Although power is required to rotate the drum, the faster precipitation and continuous recovery of cement copper are advantages of the tumbler method. Cost evaluation indicates that the rotary drum method, which uses relatively low-cost and readily available shredded automobile scrap, is competitive with the launder method, which uses relatively high-cost shredded tinplate scrap or detinned shredded cans.