Turbulence Modeling Validation, Testing, and Development

Turbulence Modeling Validation, Testing, and Development PDF

Author: National Aeronautics and Space Administration (NASA)

Publisher: Createspace Independent Publishing Platform

Published: 2018-07-17

Total Pages: 100

ISBN-13: 9781722849597

DOWNLOAD EBOOK →

The primary objective of this work is to provide accurate numerical solutions for selected flow fields and to compare and evaluate the performance of selected turbulence models with experimental results. Four popular turbulence models have been tested and validated against experimental data often turbulent flows. The models are: (1) the two-equation k-epsilon model of Wilcox, (2) the two-equation k-epsilon model of Launder and Sharma, (3) the two-equation k-omega/k-epsilon SST model of Menter, and (4) the one-equation model of Spalart and Allmaras. The flows investigated are five free shear flows consisting of a mixing layer, a round jet, a plane jet, a plane wake, and a compressible mixing layer; and five boundary layer flows consisting of an incompressible flat plate, a Mach 5 adiabatic flat plate, a separated boundary layer, an axisymmetric shock-wave/boundary layer interaction, and an RAE 2822 transonic airfoil. The experimental data for these flows are well established and have been extensively used in model developments. The results are shown in the following four sections: Part A describes the equations of motion and boundary conditions; Part B describes the model equations, constants, parameters, boundary conditions, and numerical implementation; and Parts C and D describe the experimental data and the performance of the models in the free-shear flows and the boundary layer flows, respectively. Bardina, J. E. and Huang, P. G. and Coakley, T. J. Ames Research Center...

Engineering Turbulence Modelling and Experiments - 4

Engineering Turbulence Modelling and Experiments - 4 PDF

Author: D. Laurence

Publisher: Elsevier

Published: 1999-04-14

Total Pages: 975

ISBN-13: 0080530982

DOWNLOAD EBOOK →

These proceedings contain the papers presented at the 4th International Symposium on Engineering Turbulence Modelling and Measurements held at Ajaccio, Corsica, France from 24-26 May 1999. It follows three previous conferences on the topic of engineering turbulence modelling and measurements. The purpose of this series of symposia is to provide a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. Turbulence is still one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends more and more on the performance of the turbulence models. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation.

Fundamentals Of Turbulence Modelling

Fundamentals Of Turbulence Modelling PDF

Author: Ching Jen Chen

Publisher: CRC Press

Published: 1997-12-01

Total Pages: 312

ISBN-13: 9781560324058

DOWNLOAD EBOOK →

Focuses on the second-order turbulence-closure model and its applications to engineering problems. Topics include turbulent motion and the averaging process, near-wall turbulence, applications of turbulence models, and turbulent buoyant flows.

Engineering Turbulence Modelling and Experiments 6

Engineering Turbulence Modelling and Experiments 6 PDF

Author: Wolfgang Rodi

Publisher: Elsevier

Published: 2005-05-05

Total Pages: 1011

ISBN-13: 0080530958

DOWNLOAD EBOOK →

Proceedings of the world renowned ERCOFTAC (International Symposium on Engineering Turbulence Modelling and Measurements). The proceedings include papers dealing with the following areas of turbulence: · Eddy-viscosity and second-order RANS models · Direct and large-eddy simulations and deductions for conventional modelling · Measurement and visualization techniques, experimental studies · Turbulence control · Transition and effects of curvature, rotation and buoyancy on turbulence · Aero-acoustics · Heat and mass transfer and chemically reacting flows · Compressible flows, shock phenomena · Two-phase flows · Applications in aerospace engineering, turbomachinery and reciprocating engines, industrial aerodynamics and wind engineering, and selected chemical engineering problems Turbulence remains one of the key issues in tackling engineering flow problems. These problems are solved more and more by CFD analysis, the reliability of which depends strongly on the performance of the turbulence models employed. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation. As in other fields of Science, in the rapidly developing discipline of turbulence, swift progress can be achieved only by keeping up to date with recent advances all over the world and by exchanging ideas with colleagues active in related fields.

Turbulence Models and Their Application

Turbulence Models and Their Application PDF

Author: Tuncer Cebeci

Publisher: Springer Science & Business Media

Published: 2003-12-04

Total Pages: 140

ISBN-13: 9783540402886

DOWNLOAD EBOOK →

After a brief review of the more popular turbulence models, the author presents and discusses accurate and efficient numerical methods for solving the boundary-layer equations with turbulence models based on algebraic formulas (mixing length, eddy viscosity) or partial-differential transport equations. A computer program employing the Cebeci-Smith model and the k-e model for obtaining the solution of two-dimensional incompressible turbulent flows without separation is discussed in detail and is presented in the accompanying CD.

Lanterna Rally - Theme by Grace Themes