Cyclic Creep and Fatigue of TD-NiCr (thoria-dispersion-strengthened Nickel-chromium), TD-Ni, and NiCr Sheet at 1200 C

Cyclic Creep and Fatigue of TD-NiCr (thoria-dispersion-strengthened Nickel-chromium), TD-Ni, and NiCr Sheet at 1200 C PDF

Author: Marvin H. Hirschberg

Publisher:

Published: 1972

Total Pages: 36

ISBN-13:

DOWNLOAD EBOOK →

The resistance of thin TD-NiCr sheet to cyclic deformation was compared with that of TD-Ni and a conventional nickel-chromium alloy. Strains were determined by a calibration technique which combines room-temperature strain gage and deflection measurements with high-temperature deflection measurements. Analyses of the cyclic tests using measured tensile and creep-rupture data indicated that the TD-NiCr and NiCr alloy specimens failed by a cyclic creep mechanism. The TD-Ni specimens, on the other hand, failed by a fatigue mechanism.

Fatigue under Thermal and Mechanical Loading: Mechanisms, Mechanics and Modelling

Fatigue under Thermal and Mechanical Loading: Mechanisms, Mechanics and Modelling PDF

Author: J. Bressers

Publisher: Springer Science & Business Media

Published: 2013-04-17

Total Pages: 497

ISBN-13: 9401586365

DOWNLOAD EBOOK →

The International Symposium "Fatigue under Thermal and Mechanical Loading", held at Petten (The Netherlands) on May 22-24, 1995, was jointly organized by the Institute for Advanced Materials of The Joint Research Centre, E. C. , and by the Societe Fran~se de Metallurgie et de Materiaux. The fast heating and cooling cycles experienced by many high temperature components cause thermally induced stresses, which often operate in combination with mechanical loads. The resulting thermal / mechanical fatigue cycle leads to material degradation mechanisms and failure modes typical of service cycles. The growing awareness that the synergism between the combined thermal and mechanical loads can not be reproduced by means of isothermal tests, has resulted in an increasing interest in thermal and thermo-mechanical fatigue testing. This trend has been reinforced by the constant pull by industry for more performant, yet safer high temperature systems, pushing the materials to the limit of their properties. Dedicated ASTM meetings in particular have set the scene for this area of research. The proceedings of the symposium organized by D. A. Spera and D. F. Mowbray in 1975 provided a reference book on thermal fatigue which reflects the knowledge and experimental capabilities of the mid-seventies.