-PDF Download- Sintering Applications EBOOK

Sintering Applications

Author: Burcu Ertug

Publisher: BoD – Books on Demand

Published: 2013-02-06

Total Pages: 354

ISBN-13: 953510974X

Sintering is one of the final stages of ceramics fabrication and is used to increase the strength of the compacted material. In the Sintering of Ceramics section, the fabrication of electronic ceramics and glass-ceramics were presented. Especially dielectric properties were focused on. In other chapters, sintering behaviour of ceramic tiles and nano-alumina were investigated. Apart from oxides, the sintering of non-oxide ceramics was examined. Sintering the metals in a controlled atmosphere furnace aims to bond the particles together metallurgically. In the Sintering of Metals section, two sections dealt with copper containing structures. The sintering of titanium alloys is another topic focused in this section. The chapter on lead and zinc covers the sintering in the field of extractive metallurgy. Finally two more chapter focus on the basics of sintering,i.e viscous flow and spark plasma sintering.

Powder Sintering and Potential Applications

Author: Chao Yang

Publisher: Frontiers Media SA

Published: 2021-11-23

Total Pages: 104

ISBN-13: 2889716554

DOWNLOAD EBOOK →

Spark Plasma Sintering of Materials

Author: Pasquale Cavaliere

Publisher: Springer

Published: 2019-02-18

Total Pages: 781

ISBN-13: 303005327X

DOWNLOAD EBOOK →

This book describes spark plasma sintering (SPS) in depth. It addresses fundamentals and material-specific considerations, techniques, and applications across a broad spectrum of materials. The book highlights methods used to consolidate metallic or ceramic particles in very short times. It highlights the production of complex alloys and metal matrix composites with enhanced mechanical and wear properties. Emphasis is placed on the speed of the sintering processes, uniformity in product microstructure and properties, reduced grain growth, the compaction and sintering of materials in one processing step, various materials processing, and high energy efficiency. Current and potential applications in space science and aeronautics, automation, mechanical engineering, and biomedicine are addressed throughout the book.

Field-Assisted Sintering

Author: Eugene A. Olevsky

Publisher: Springer

Published: 2018-08-09

Total Pages: 425

ISBN-13: 3319760327

DOWNLOAD EBOOK →

This book represents the first ever scientific monograph including an in-depth analysis of all major field-assisted sintering techniques. Until now, the electromagnetic field-assisted technologies of materials processing were lacking a systematic and generalized description in one fundamental publication; this work promotes the development of generalized concepts and of comparative analyses in this emerging area of materials fabrication. This book describes modern technologies for the powder processing-based fabrication of advanced materials. New approaches for the development of well-tailored and stable structures are thoroughly discussed. Since the potential of traditional thermo-mechanical methods of material treatment is limited due to inadequate control during processing, the book addresses ways to more accurately control the resultant material's structure and properties by an assisting application of electro-magnetic fields. The book describes resistance sintering, high-voltage consolidation, sintering by low-voltage electric pulses (including spark plasma sintering), flash sintering, microwave sintering, induction heating sintering, magnetic pulse compaction and other field-assisted sintering techniques. Includes an in-depth analysis of all major field-assisted sintering techniques; Explains new techniques and approaches for material treatment; Provides detailed descriptions of spark plasma sintering, microwave sintering, high-voltage consolidation, magnetic pulse compaction, and various other approaches when field-assisted treatment is applied.

Sintering: From Empirical Observations to Scientific Principles

Author: Randall German

Publisher: Butterworth-Heinemann

Published: 2014-02-07

Total Pages: 549

ISBN-13: 0124016774

DOWNLOAD EBOOK →

As sintering applications march toward a $30 billion global business, the models for sintering have progressed, but generally follow behind observation. Documentation of the steps needed to build to a quantitative and predictive theory are often missed. Sintering: From Empirical Observations to Scientific Principles partitions sintering applications and observations to show critical turning points required to establish modern sintering as a predictive science. This book, written by the most cited author in his field, is laced with people, organizations, critical steps, and important formulations in a mixture of history, personalities, and applications. Exploring how insights in seemingly unrelated fields sparked progress, it is also a teaching tool to show where there is success, where there are problems, and how to organize teams to leapfrog to new applications or plateaus of use. Randall German's Sintering: From Empirical Observations to Scientific Principles is a platform for directly addressing the critical control parameters in these new research and development efforts. Shows how the theories and understanding of sintering were developed and improved over time, and how different products were developed, ultimately leading to important knowledge and lessons for solving real sintering problems Covers all the necessary infrastructure of sintering theory and practice, such as atomic theory, surface energy, microstructure, and measurement and observation tools Introduces the history and development of such early sintered products as porcelain, tungsten lamp filaments, bronze bearings, steel automotive components, platinum crucibles and more

Sintering Technology

Author: Malin Liu

Publisher: BoD – Books on Demand

Published: 2018-10-31

Total Pages: 130

ISBN-13: 1789842816

DOWNLOAD EBOOK →

Sintering technology is an old and extensive technology in many areas, and it has been used especially in ceramic fabrication. This book covers many fields, for example, the development of different sintering technologies in recent years, such as spark plasma sintering, flash sintering, microwave sintering, reaction and laser sintering, and so on, and also some special ceramic material fabrication methods and applications, such as carbon nanotubes mixed with alumina and zirconia ceramics, pure and doped zirconia, ZnO ceramic varistors, and so on.

Liquid Phase Sintering

Author: R.M. German

Publisher: Springer Science & Business Media

Published: 2013-12-14

Total Pages: 242

ISBN-13: 1489935991

DOWNLOAD EBOOK →

In the past few years there has been rapid growth in the activities involving particulate materials because of recognized advantages in manufacturing. This growth is attributed to several factors; i) an increased concern over energy utilization, ii) a desire to better control microstructure in engineermg materials, iii) the need for 1mproved material economy, iv) societal and economic pressures for higher productivity and quality, v) requirements for unique property combinations for high performance applica tions, and vi) a desire for net shape forming. Accordingly, liquid phase sintering has received increased attention as part of the growth in particulate materials processing. As a consequence, the commercial applications for liquid phase sintering are expanding rapidly. This active and expanding interest is not well served by available texts. For this reason I felt it was appropriate to write this book on liquid phase sintering. The technology of liquid phase sintering IS quite old and has been in use in the ceramics industry for many centuries. However, the general perception among materials and manufacturing engineers is that liquid phase sintering is still a novel technique. I believe the diverse technological appli cations outlined in this book will dispel I such impressions. Liquid phase. sintering has great value in fabricating several unique materials to near net shapes and will continue to expand in applications as the fundamental attrib utes are better appreciated. I am personally involved with several uses for liquid phase sintering.

Sintering of Ceramics

Author: Mohamed N. Rahaman

Publisher: CRC Press

Published: 2007-07-06

Total Pages: 388

ISBN-13: 142000705X

DOWNLOAD EBOOK →

Sintering of Ceramics provides the only comprehensive treatment of the theories and principles of sintering and their application to the production of advanced ceramics with the required target microstructure. Stemming from the author's bestselling text, Ceramic Processing and Sintering, this book includes additional material selected

Additive Manufacturing: Materials, Processes, Quantifications and Applications

Author: Jing Zhang

Publisher: Butterworth-Heinemann

Published: 2018-05-17

Total Pages: 362

ISBN-13: 0128123273

DOWNLOAD EBOOK →

Additive Manufacturing: Materials, Processes, Quantifications and Applications is designed to explain the engineering aspects and physical principles of available AM technologies and their most relevant applications. It begins with a review of the recent developments in this technology and then progresses to a discussion of the criteria needed to successfully select an AM technology for the embodiment of a particular design, discussing material compatibility, interfaces issues and strength requirements. The book concludes with a review of the applications in various industries, including bio, energy, aerospace and electronics. This book will be a must read for those interested in a practical, comprehensive introduction to additive manufacturing, an area with tremendous potential for producing high-value, complex, individually customized parts. As 3D printing technology advances, both in hardware and software, together with reduced materials cost and complexity of creating 3D printed items, these applications are quickly expanding into the mass market. Includes a discussion of the historical development and physical principles of current AM technologies Exposes readers to the engineering principles for evaluating and quantifying AM technologies Explores the uses of Additive Manufacturing in various industries, most notably aerospace, medical, energy and electronics

Industrial Chemistry of Oxides for Emerging Applications

Author: Lech Pawlowski

Publisher: John Wiley & Sons

Published: 2018-03-02

Total Pages: 400

ISBN-13: 1119423678

DOWNLOAD EBOOK →

Valuable insights into the extraction, production, and properties of a large number of natural and synthetic oxides utilized in applications worldwide from ceramics, electronic components, and coatings This handbook describes each of the major oxides chronologically—starting from the processes of extraction of ores containing oxides, their purification and transformations into pure alloyed powders, and their appropriate characterization up to the processes of formation of 2D films by such methods as PVD, CVD, and coatings by thermal spraying or complicated 3D objects by sintering and rapid prototyping. The selection of oxides has been guided by the current context of industrial applications. An important point that is considered in the book concerns the strategic aspects of oxides. Some oxides (e.g. rare earth ones) become more expensive due to the growing demand for them, others, because of the strategic importance of countries producing raw materials and the countries that are using them. Industrial Chemistry of Oxides for Emerging Applications provides readers with everything they need to know in 7 chapters that cover: technical and economical importance of oxides in present and future; fundamentals of oxides manufacturing; extraction, properties, and applications of Al2O3; extraction, properties, and applications of ZrO2; synthesis, properties, and applications of YBaCu2O7x; extraction, properties, and applications of TiO2; and synthesis, properties, and application of hydroxyapatite. Presents the extraction, production, and properties of a large fraction of oxides applications worldwide, both natural as well as synthetic multi‐oxides Covers a very important segment of many industrial processes, such as refractories and piezoelectric oxides—both applications constituting very large market segments Developed from a lecture course given by the authors for over a decade Industrial Chemistry of Oxides for Emerging Applications is an excellent text for university professors and teachers, and graduate and postgraduate students with a solid background in physics and chemistry.