Risk Management Series; Design Guide for Improving Critical Facility Safety from Flooding and High Winds

Risk Management Series; Design Guide for Improving Critical Facility Safety from Flooding and High Winds PDF

Author: U. S. Department Security

Publisher: FEMA

Published: 2013-01-26

Total Pages: 394

ISBN-13:

DOWNLOAD EBOOK →

On August 29, 2005, Hurricane Katrina caused extensive damage to the coast along the Gulf of Mexico, resulting in an unprecedented relief, recovery, and reconstruction effort. This reconstruction presents a unique opportunity to rebuild the communities and public infrastructure using the latest hazard mitigation techniques proven to be more protective of lives and property. Critical facilities comprise all public and private facilities deemed by a community to be essential for the delivery of vital services, protection of special populations, and the provision of other services of importance for that community. This manual concentrates on a smaller group of facilities that are crucial for protecting the health and safety of the population: health care, educational, and emergency response facilities. The Design Guide for Improving Critical Facility Safety from Flooding and High Winds (FEMA 543) was developed with the support of the Federal Emergency Management Agency (FEMA) Region IV in the aftermath of Hurricane Katrina. This manual recommends incorporating hazard mitigation measures into all stages and at all levels of critical facility planning and design, for both new construction and the reconstruction and rehabilitation of existing facilities. It provides building professionals and decision makers with information and guidelines for implementing a variety of mitigation measures to reduce the vulnerability to damage and disruption of operations during severe flooding and high-wind events. The underlying theme of this manual is that by building more robust critical facilities that will remain operational during and after a major disaster, people's lives and the community's vitality can be better preserved and protected. The poor performance of many critical facilities in the affected areas was not unique to Hurricane Katrina. It was observed in numerous hurricanes dating back more than three decades. Several reasons may explain this kind of performance. In many cases the damaged facilities were quite old and were constructed well before the introduction of modern codes and standards. Some of the older facilities were damaged because building components had deteriorated as a result of inadequate maintenance. Many fa¬cilities occupy unsuitable buildings that were never intended for this type of use. Some newer facilities suffered damage as a result of deficiencies in design and construction or the application of inappropriate design criteria and standards. The primary objective of this manual is to assist the building design community and local officials and decision makers in adopting and implementing sound mitigation measures that will decrease the vulnerability of critical facilities to major disasters. The goals of this manual are to: Present and recommend the use of building design features and building materials and methods that can improve the performance of critical facilities in hazard-prone areas during and after flooding and high-wind events. m Introduce and provide guidelines for implementing flooding and high-wind mitigation best practices into the process of design, construction, and operation and maintenance of critical facilities; and To aid in the reconstruction of the Gulf Coast in the wake of Hurricane Katrina, this manual presents an overview of the principal planning and design considerations for improving the performance of critical facilities during, and in the aftermath of, flooding and high-wind events. It provides design guidance and practical recommendations for protecting critical facilities and their occupants against these natural hazards. It presents incremental approaches that can be implemented over time to decrease the vulnerability of buildings, but emphasizes the importance of incorporating the requirements for mitigation against flooding and high winds into the planning and design of critical facilities from the very beginning of the process.

Design Guide for Improving School Safety in Earthquakes, Floods, and High Winds

Design Guide for Improving School Safety in Earthquakes, Floods, and High Winds PDF

Author:

Publisher:

Published: 2004

Total Pages: 368

ISBN-13:

DOWNLOAD EBOOK →

This manual is intended to provide guidance for the protection of school buildings and their occupants from natural disasters, and the economic losses and social disruption caused by building damage and destruction. This volume concentrates on grade schools, K-12. This publication covers earthquakes, floods, and high winds. Its intended audience is design professionals and school officials involved in the technical and financial decisions of school construction, repair, and renovations. This publication stresses that identification of hazards and their frequency and careful consideration of design against hazards must be integrated with all other design issues, and be present from the inception of the site selection and building design process. Chapters 1-3 present issues and background information that are common to all hazards. Chapters 4-6 cover the development of specific risk management measures for each of the three main natural hazards. Chapter 1 opens with a brief outline of the past, present, and future of school design. Chapter 2 introduces the concepts of performance-based design in order to obtain required performance from a new or retrofitted facility. Chapter 3 introduces the concept of multihazard design and presents a general description and comparison of the hazards, including charts that show where design against each hazard interacts with design for other hazards. Chapters 4, 5, and 6 outline the steps necessary in the creation of design to address risk management concerns for protection against earthquakes, floods, and high winds, respectively. A guide to the determination of acceptable risk and realistic performance objectives is followed by a discussion to establish the effectiveness of current codes to achieve acceptable performance. A list of acronyms used in the manual are appended. (Contains 13 tables and 124 figures.).

Hazard Mitigation Grant Program Desk Reference (FEMA 345)

Hazard Mitigation Grant Program Desk Reference (FEMA 345) PDF

Author: Federal Emergency Management Agency

Publisher: Createspace Independent Pub

Published: 2013-02-01

Total Pages: 236

ISBN-13: 9781482339888

DOWNLOAD EBOOK →

FEMA's Hazard Mitigation Grant Program is a powerful resource in the combined effort by Federal, State, and local government, as well as private industry and homeowners, to end the cycle of repetitive disaster damage. The Robert T. Stafford Disaster Relief and Emergency Assistance Act was passed on November 23, 1988, amending Public Law 93-288, the Disaster Relief Act of 1974. The Stafford Act included Section 404, which established the Hazard Mitigation Grant Program. In 1993, the Hazard Mitigation and Relocation Act amended Section 404 to increase the amount of HMGP funds available and the cost-share to 75 percent Federal. This amendment also encouraged the use of property acquisition and other non-structural flood mitigation measures. In an effort to streamline HMGP delivery, FEMA encourages States to develop their mitigation programs before disaster strikes. States are adopting a more active HMGP management role. Increased capabilities may include: Conducting comprehensive all-hazard mitigation planning prior to disaster events; Providing applicants technical assistance on sound mitigation techniques and hazard mitigation policy and procedures; Coordinating mitigation programs through interagency teams or councils. Conducting benefit-cost analyses; and Preparing National Environmental Policy Act reviews for FEMA approval. States that integrate the HMGP with their frequently updated State Administrative and Hazard Mitigation Plans will create cohesive and effective approaches to loss reduction. This type of coordinated approach minimizes the distinction between “predisaster” and “post-disaster” time periods, and instead produces an ongoing mitigation effort. Hazard mitigation is any sustained action taken to reduce or eliminate long-term risk to people and property from natural hazards and their effects. A key purpose of the HMGP is to ensure that the opportunity to take critical mitigation measures to protect life and property from future disasters is not lost during the recovery and reconstruction process following a disaster. Program grant funds available under Section 404 of the Stafford Act provide States with the incentive and capability to implement mitigation measures that previously may have been infeasible. The purpose of this Desk Reference is to: Provide comprehensive information about FEMA's Hazard Mitigation Grant Program (HMGP); Increase awareness of the HMGP as an integral part of statewide hazard mitigation efforts; and Encourage deeper commitments and increased responsibilities on the part of all States and communities to reduce damage and losses from natural disasters. This Desk Reference is organized to simplify program information and assist the reader with practical guidance for successful participation in the program. Lists of program-related acronyms and definitions are included, along with appendices that amplify selected aspects of the HMGP. This Desk Reference is organized into 14 sections, each of which presents a major HMGP subject area. In each section, information is presented on the right side of the page. In several sections, job aids containing supplemental material are provided. The job aids for each section can be found at the end of the section. At the front of each section, there is a detailed table of contents to help you locate specific information.