-PDF Download- Pvc Handbook EBOOK

PVC Handbook

Author: Charles E. Wilkes

Publisher: Hanser Gardner Publications

Published: 2005

Total Pages: 723

ISBN-13: 9781569903797

In this single handbook, the editors aim to give a diverse audience of readers a complete account of all aspects of PVC--from monomer manufacture to polymerization; the gamut of such additives as stabilizers, lubricants, plasticizers, impact modifiers, fillers and reinforcing agents; blends and alloys; compounding and processing; characterization; combustion resistance and weatherability; product engineering design; applications; environmental and safety; and finally the PVC industry dynamics. This handbook contains both practical formulation information as well as a mechanistic view of why PVC behaves as it does.

Handbook of PVC Pipe Design and Construction

Author: Uni-Bell PVC Pipe Association

Publisher:

Published: 2012

Total Pages: 0

ISBN-13: 9780831134501

DOWNLOAD EBOOK →

The Most Thorough and Far-reaching Revision Yet! The new 5th edition of the Handbook of PVC Pipe Design and Construction is the most comprehensive and up-to-date reference on PVC pipe and fittings. It provides practical engineering and construction information. It includes recommendations applicable to the design and use of primarily underground PVC piping systems in both pressure and non-pressure applications. Previous editions have been used by engineers all across North America and around the globe in the utility and consulting engineering sectors, as well as in universities and technical institutions. New to the Fifth Edition Four new chapters PVC Pressure Pipe Installation PVC Non-Pressure Pipe Installation Trenchless Installation of PVC Pipe Molecularly Oriented Polyvinyl Chloride Pipe (PVCO) Updated and improved graphs and tables More open page format The collaborative result of thousands of hours of research and review, the contents of the 5th edition are numerically formatted by section and subsection, as well as by figure and table designation. This allows easy reference and quick access. The Handbook of PVC Pipe Design and Construction is a must-have reference for design engineers, public and private pipe utility managers, and students. A more complete text on PVC pipe is not available.

PVC Formulary

Author: George Wypych

Publisher: ChemTec Publishing

Published: 2020-04-01

Total Pages: 420

ISBN-13: 1927885639

DOWNLOAD EBOOK →

PVC Formulary, Third Edition, contains invaluable information for PVC manufacturers, processors and users. It discusses new product development and product engineering tools and the current state of the market for PVC products. This provides the reader with the critical data they need to formulate successful and durable products, and to evaluate formulations on the background of compositions used by others. Commercial types and grades, polymer forms, and physical-chemical properties of PVC are discussed in detail, with all essential information required for the decision-making process presented clearly to provide necessary data. The book contains over 600 formulations of products belonging to 23 categories that are derived from characteristic methods of production. A broad selection of formulations is used in each category to determine the essential components of formulations used in a particular method of processing, the most important parameters of successful products, troubleshooting information, and suggestions of further sources of information on the method of processing. The concept of this work and its companion book (PVC Degradation & Stabilization also published in 2020) is to provide the reader with complete information and data required to formulate successful and durable products and/or to evaluate formulations on the background of compositions used by others. Provides a comprehensive and data-rich guide to PVC and its additives, enabling easier and more effective material selection Includes over 600 formulations, along with methods of processing and troubleshooting information Presents critical data on physical properties, mechanical properties, health and safety, and environmental information for PVC and its products

Handbook of Polyvinyl Chloride Formulating

Author: Edward J. Wickson

Publisher: Wiley-Interscience

Published: 1993-08-23

Total Pages: 0

ISBN-13: 9780471601821

DOWNLOAD EBOOK →

A ready reference describing, in detail, properties of various commercial PVC resins available in the U.S. and Canada and how these, together with additives, are used in formulating PVC. Coverage includes economics of formulating, basic statistics and design of experiments, laboratory compounding and test methods, environmental and health concerns in formulating vinyl compounds. Also contains chapters on dry blending, powder coatings, plastisol and organosol preparation and electron beam radiation curing.

Handbook of Vinyl Formulating

Author: Richard F Grossman

Publisher: John Wiley & Sons

Published: 2008-05-02

Total Pages: 545

ISBN-13: 0470253541

DOWNLOAD EBOOK →

Here is your starting point and complete guide to polyvinyl chloride (PVC) formulation. It covers the basics of vinyl formulation, starting formulations for compounds, and the latest compounding ingredients. Since publication of the acclaimed first edition, a standard reference used by vinyl technologists around the world, there have been many new developments in vinyl formulation as well as new discoveries and insights into the underlying mechanisms. It's all covered here in the second edition, in one highly readable, expertly organized volume.

PVC Degradation and Stabilization

Author: George Wypych

Publisher: Elsevier

Published: 2015-03-18

Total Pages: 499

ISBN-13: 1927885000

DOWNLOAD EBOOK →

PVC stabilization, the most important aspect of formulation and performance of this polymer, is discussed in details. This book contains all information required to design successful stabilization formula for any product made out of PVC. Separate chapters review information on chemical structure, PVC manufacturing technology, morphology, degradation by thermal energy, UV, gamma, other forms of radiation, mechanodegradation, and chemical degradation. The chapter on analytical methods used in studying of degradative and stabilization processes helps in establishing system of checking results of stabilization with different stabilizing systems. Stabilization and stabilizers are discussed in full detail in the most important chapter of this book. The final chapter contains information on the effects of PVC and its additives on health, safety and environment. This book contains analysis of all essential papers and patents published until recently on the above subject. It either locates the answers to relevant questions and offers solutions or gives references in which such answers can be found. PVC Degradation and Stabilization is must to have for chemists, engineers, scientists, university teachers and students, designers, material scientists, environmental chemists, and lawyers who work with polyvinyl chloride and its additives or have any interest in these products. This book is the one authoritative source on the subject. A practical and up-to-date reference guide for engineers and scientists designing with PVC Covers thermal, UV, gamma radiation, chemical, and other forms of degradation Includes a critical discussion of the sustainability issues faced by PVC and its additives, as well as health and safety concerns

Practical Guide to Polyvinyl Chloride

Author: Stuart Patrick

Publisher: iSmithers Rapra Publishing

Published: 2005

Total Pages: 178

ISBN-13: 9781859575116

DOWNLOAD EBOOK →

Polyvinyl chloride (PVC) has been around since the late part of the 19th century, although it was not produced commercially until the 1920s; it is the second largest consumed plastic material after polyethylene. PVC products can be rigid or flexible, opaque or transparent, coloured, and insulating or conducting. There is not just one PVC but a whole family of products tailor-made to suit the needs of each application. PVC is extremely cost effective in comparison to other plastics with a high degree of versatility in end-use and processing possibilities, as the reader will note from this book. It is durable, easily maintained, and can be produced in a large range of colours. As a result PVC finds use in an extensive range of applications in virtually all areas of human activity, including medical equipment, construction applications such as flexible roof membranes, pipes and window profiles, toys, automotive parts and electrical cabling. The PVC industry has also started to tackle some of its end-of-life issues. This practical guide provides comprehensive background on the resins and additives, their properties and processing characteristics, as well as discussion of product design and development issues. There have been, and still are, issues and perceptions over environmental and health acceptance covering vinyl chloride monomer, dioxins, phthalate plasticisers, and lead (and cadmium) based heat stabilisers and these are discussed in depth in this book. This book will be of interest to raw materials suppliers and processors or end-users of PVC, as well as anyone with a general interest in this versatile material: resins and additives properties and testing design issues processing, including post processing and assembly property enhancement sustainable development

Handbook of Plasticizers

Author: George Wypych

Publisher: Elsevier

Published: 2023-02-08

Total Pages: 917

ISBN-13: 1774670232

DOWNLOAD EBOOK →

Handbook of Plasticizers, Fourth Edition provides a comprehensive review of the current literature as well as cutting-edge details on plasticizers obtained from renewable resources. The book specifies the typical properties of plasticizers belonging to one of thirty-one groups, including expected properties in a given group. The mechanisms of plasticizers, plasticization production steps, and their material behavior in plasticized systems are outlined, along with theoretical background to help readers understand practical observations and methods of material improvement. Other chapters cover the effects on the physical and mechanical properties of plasticized materials, their use in polymers, processing defects formation, and more. This is an essential professional reference, providing R&D scientists, production chemists, and engineers the information they need to avoid certain plasticizers in applications where they may cause health or material durability problems. In addition, the book shows readers how and where to use plasticizers more effectively. Provides detailed coverage of thirty-one groups of plasticizers, covering their properties, production, processing, applications, health and environmental aspects Contains new material on odors in plastic materials and their removal Includes expanded coverage of plasticizers from renewable resources

PVC Additives

Author: Michael Schiller

Publisher: Carl Hanser Verlag GmbH Co KG

Published: 2022-04-11

Total Pages: 499

ISBN-13: 1569908729

DOWNLOAD EBOOK →

PVC differs in its stabilization compared to other commodity plastics. Various metal compounds are suitable for the stabilization of PVC: lead, tin, calcium, magnesium, zinc, rare earths, and also almost-metal-free systems. These differences are described in the introductory part of this book, with their advantages, possibilities, and problems, from the perspective of the chemist but made understandable for salespeople and technicians. Numerous tables and figures are included, providing structures and physico-chemical data. A special section for beginners is dedicated to guiding formulations and test methods. A relatively short section deals with development trends in Europe. Sustainability is a major theme, and it is demonstrated that PVC has a strong potential to develop into a fully sustainable material. Another section deals with the everyday problems in the processing of PVC, such as the formation of specks, photo-effects, and plate-out. Plate-out is a common problem in the processing of PVC but only relatively few publications cover it. The causes, influencing factors, and mechanisms are still poorly understood. This section, unique in the literature, provides assistance in the selection and dosage of raw materials to PVC processor, based on the influencing factors during processing.

Handbook of Polyethylene Pipe

Author:

Publisher: Plastics Pipe Institute

Published: 2012-02

Total Pages: 620

ISBN-13: 9781952632006

DOWNLOAD EBOOK →

Published by the Plastics Pipe Institute (PPI), the Handbook describes how polyethylene piping systems continue to provide utilities with a cost-effective solution to rehabilitate the underground infrastructure. The book will assist in designing and installing PE piping systems that can protect utilities and other end users from corrosion, earthquake damage and water loss due to leaky and corroded pipes and joints.