-PDF Download- Power Systems Analysis Illustrated With Matlab And Etap EBOOK

Power Systems Analysis Illustrated with MATLAB and ETAP

Author: Hemchandra Madhusudan Shertukde

Publisher: CRC Press

Published: 2019-01-15

Total Pages: 282

ISBN-13: 0429792425

Electrical power is harnessed using several energy sources, including coal, hydel, nuclear, solar, and wind. Generated power is needed to be transferred over long distances to support load requirements of customers, viz., residential, industrial, and commercial. This necessitates proper design and analysis of power systems to efficiently control the power flow from one point to the other without delay, disturbance, or interference. Ideal for utility and power system design professionals and students, this book is richly illustrated with MATLAB® and Electrical Transient Analysis Program (ETAP®) to succinctly illustrate concepts throughout, and includes examples, case studies, and problems. Features Illustrated throughout with MATLAB and ETAP Proper use of positive/negative/zero sequence analysis of a given one-line diagram (OLD) associated with a grid, as well as finger-holding instructions to tackle a power system analysis (PSA) problem for a given OLD of a grid On-line evaluation of power flow, short-circuit analysis, and related PSA for a given OLD Appropriately learn the finer nuances of designing the several components of a PSA, including transmission lines, transformers, generators/motors, and illustrate the corresponding equivalent circuit Case studies from utilities and independent system operators

THE EASIEST WAY TO RUN ETAP SOFTWARE

Author: Aji Akbar Firdaus

Publisher: Airlangga University Press

Published: 2023-05-23

Total Pages: 63

ISBN-13: 6024739699

DOWNLOAD EBOOK →

This book is a translation of the Indonesian version titled “Cara EZ Belajar ETAP”. This English version is expected to be available for a broad range of readers. Do you know the electrical power system? This system is a high or medium voltage electrical network but calculations are required to measure and validate a network system. However, if manual calculations are used, it will take a very long time. Therefore, a software named etap was created. etap (electrical transient analysis program) is a software used to simplify the analysis of an electrical network system. As its name suggests, etap can work to analyze power flow (load flow), transient disturbance (transient), harmonics, and up to the protection system (short circuit). This etap software also has standards, namely ANSI (American National Standards Institute) and IEC (International Electrotechnical Commission) standards.

Power System Analysis

Author: N. V. Ramana

Publisher: Pearson Education India

Published: 2011

Total Pages: 460

ISBN-13: 9788131755921

DOWNLOAD EBOOK →

Power System Analysis is a comprehensive text designed for an undergraduate course in electrical engineering. Written in a simple and easy-to-understand manner, the book introduces the reader to power system network matrices and power system steady-state stability analysis. The book contains in-depth coverage of symmetrical fault analysis and unbalanced fault analysis; exclusive chapters on power flow studies; a comprehensive chapter on transient stability; precise explanation supported by suitable examples and is replete with objective questions and review questions.

Power Systems Analysis

Author: P.S.R. Murty

Publisher: Butterworth-Heinemann

Published: 2017-06-09

Total Pages: 420

ISBN-13: 0081012349

DOWNLOAD EBOOK →

Power Systems Analysis, Second Edition, describes the operation of the interconnected power system under steady state conditions and under dynamic operating conditions during disturbances. Written at a foundational level, including numerous worked examples of concepts discussed in the text, it provides an understanding of how to keep power flowing through an interconnected grid. The second edition adds more information on power system stability, excitation system, and small disturbance analysis, as well as discussions related to grid integration of renewable power sources. The book is designed to be used as reference, review, or self-study for practitioners and consultants, or for students from related engineering disciplines that need to learn more about power systems. Includes comprehensive coverage of the analysis of power systems, useful as a one-stop resource Features a large number of worked examples and objective questions (with answers) to help apply the material discussed in the book Offers foundational content that provides background and review for the understanding and analysis of more specialized areas of electric power engineering

ELECTRICAL POWER SYSTEMS

Author: P. VENKATESH

Publisher: PHI Learning Pvt. Ltd.

Published: 2012-04-03

Total Pages: 528

ISBN-13: 812034538X

DOWNLOAD EBOOK →

This textbook introduces electrical engineering students to the most relevant concepts and techniques in three major areas today in power system engineering, namely analysis, security and deregulation. The book carefully integrates theory and practical applications. It emphasizes power flow analysis, details analysis problems in systems with fault conditions, and discusses transient stability problems as well. In addition, students can acquire software development skills in MATLAB and in the usage of state-of-the-art software tools such as Power World Simulator (PWS) and Siemens PSS/E. In any energy management/operations control centre, the knowledge of contingency analysis, state estimation and optimal power flow is of utmost importance. Part 2 of the book provides comprehensive coverage of these topics. The key issues in electricity deregulation and restructuring of power systems such as Transmission Pricing, Available Transfer Capability (ATC), and pricing methods in the context of Indian scenario are discussed in detail in Part 3 of the book. The book is interspersed with problems for a sound understanding of various aspects of power systems. The questions at the end of each chapter are provided to reinforce the knowledge of students as well as prepare them from the examination point of view. The book will be useful to both the undergraduate students of electrical engineering and postgraduate students of power engineering and power management in several courses such as Power System Analysis, Electricity Deregulation, Power System Security, Restructured Power Systems, as well as laboratory courses in Power System Simulation.

Power System Modelling and Scripting

Author: Federico Milano

Publisher: Springer Science & Business Media

Published: 2010-09-08

Total Pages: 558

ISBN-13: 3642136699

DOWNLOAD EBOOK →

Power system modelling and scripting is a quite general and ambitious title. Of course, to embrace all existing aspects of power system modelling would lead to an encyclopedia and would be likely an impossible task. Thus, the book focuses on a subset of power system models based on the following assumptions: (i) devices are modelled as a set of nonlinear differential algebraic equations, (ii) all alternate-current devices are operating in three-phase balanced fundamental frequency, and (iii) the time frame of the dynamics of interest ranges from tenths to tens of seconds. These assumptions basically restrict the analysis to transient stability phenomena and generator controls. The modelling step is not self-sufficient. Mathematical models have to be translated into computer programming code in order to be analyzed, understood and “experienced”. It is an object of the book to provide a general framework for a power system analysis software tool and hints for filling up this framework with versatile programming code. This book is for all students and researchers that are looking for a quick reference on power system models or need some guidelines for starting the challenging adventure of writing their own code.

Computer-Aided Power System Analysis

Author: Ramasamy Natarajan

Publisher: CRC Press

Published: 2002-04-03

Total Pages: 368

ISBN-13: 0824744659

DOWNLOAD EBOOK →

This title evaluates the performance, safety, efficiency, reliability and economics of a power delivery system. It emphasizes the use and interpretation of computational data to assess system operating limits, load level increases, equipment failure and mitigating procedures through computer-aided analysis to maximize cost-effectiveness.

Modern Power Systems Analysis

Author: Xi-Fan Wang

Publisher: Springer Science & Business Media

Published: 2010-06-07

Total Pages: 561

ISBN-13: 0387728538

DOWNLOAD EBOOK →

The capability of effectively analyzing complex systems is fundamental to the operation, management and planning of power systems. This book offers broad coverage of essential power system concepts and features a complete and in-depth account of all the latest developments, including Power Flow Analysis in Market Environment; Power Flow Calculation of AC/DC Interconnected Systems and Power Flow Control and Calculation for Systems Having FACTS Devices and recent results in system stability.

MATLAB

Author: Ali Saghafinia

Publisher: BoD – Books on Demand

Published: 2018-09-19

Total Pages: 70

ISBN-13: 1789237068

DOWNLOAD EBOOK →

Conventionally, the simulation of power engineering applications can be a challenge for both undergraduate and postgraduate students. For the easy implementation of several kinds of power structure and control structures of power engineering applications, simulators such as MATLAB/(Simulink and coding) are necessary, especially for students, to develop and test various circuits and controllers in all branches of the field of power engineering. This book presents three different applications of MATLAB in the power system domain. The book includes chapters that show how to simulate and work with MATLAB software for MATLAB professional applications of power systems. Moreover, this book presents techniques to simulate power matters easily using the related toolbox existing in MATLAB/Simulink.

Electric Energy Systems

Author: Antonio Gomez-Exposito

Publisher: CRC Press

Published: 2017-12-19

Total Pages: 666

ISBN-13: 1420007270

DOWNLOAD EBOOK →

As demonstrated by recent major blackouts, power grids and their associated markets play a vital role in the operation of our society. Understanding how electric generation, transmission, and delivery systems interact and operate is paramount to guaranteeing reliable sources of electricity. Electric Energy Systems offers highly comprehensive and detailed coverage of power systems operations, uniquely integrating technical and economic analyses. The book fully develops classical subjects such as load flow, short-circuit analysis, and economic dispatch within the context of the new deregulated, competitive electricity markets. With contributions from 24 internationally recognized specialists in power engineering, the text also presents a wide range of advanced topics including harmonic load flow, state estimation, and voltage and frequency control as well as electromagnetic transients, fault analysis, and angle stability. A well-needed and updated extension on classical power systems analysis books, Electric Energy Systems provides an in-depth analysis of the most relevant issues affecting the blood-line of our society, the generation and transmission systems for electric energy.