Plasma-Material Interactions in a Controlled Fusion Reactor

Plasma-Material Interactions in a Controlled Fusion Reactor PDF

Author: Tetsuo Tanabe

Publisher: Springer Nature

Published: 2021-03-08

Total Pages: 209

ISBN-13: 9811603286

DOWNLOAD EBOOK →

This book is a primer on the interplay between plasma and materials in a fusion reactor, so-called plasma–materials interactions (PMIs), highlighting materials and their influence on plasma through PMI. It aims to demonstrate that a plasma-facing surface (PFS) responds actively to fusion plasma and that the clarifying nature of PFS is indispensable to understanding the influence of PFS on plasma. It describes the modern insight into PMI, namely, relevant feedback to plasma performance from plasma-facing material (PFM) on changes in a material surface by plasma power load by radiation and particles, contrary to a conventional view that unilateral influence from plasma on PFM is dominant in PMI. There are many books and reviews on PMI in the context of plasma physics, that is, how plasma or plasma confinement works in PMI. By contrast, this book features a materials aspect in PMI focusing on changes caused by heat and particle load from plasma: how PFMs are changed by plasma exposure and then, accordingly, how the changed PFM interacts with plasma.

Atomic and Plasma-material Interaction Processes in Controlled Thermonuclear Fusion

Atomic and Plasma-material Interaction Processes in Controlled Thermonuclear Fusion PDF

Author: Ratko K. Janev

Publisher: Elsevier Publishing Company

Published: 1993

Total Pages: 502

ISBN-13:

DOWNLOAD EBOOK →

Atomic and plasma-material interaction processes play an important role in thermonuclear fusion plasmas and the knowledge of these processes has a significant impact on fusion energy research and development. The present volume provides a comprehensive survey of atomic and plasma-material interaction aspects of controlled thermonuclear fusion. The review articles included in this volume describe the role of atomic and plasma-material interaction processes in the currently most active fusion research areas and emphasize the need for accurate quantitative information on these processes for resolving many outstanding issues in fusion research and reactor design development such as plasma energy balance, particle transport and confinement, impurity control, thermal power and helium exhaust, plasma heating and fuelling, edge plasma physics, development of fusion reactor plasma facing components and plasma diagnostics and modelling.

Physics of Plasma-Wall Interactions in Controlled Fusion

Physics of Plasma-Wall Interactions in Controlled Fusion PDF

Author: D. E. Post

Publisher: Springer Science & Business Media

Published: 2013-11-21

Total Pages: 1178

ISBN-13: 1475700679

DOWNLOAD EBOOK →

Controlled thermonuclear fusion is one of the possible candidates for long term energy sources which will be indispensable for our highly technological society. However, the physics and technology of controlled fusion are extremely complex and still require a great deal of research and development before fusion can be a practical energy source. For producing energy via controlled fusion a deuterium-tritium gas has to be heated to temperatures of a few 100 Million °c corres ponding to about 10 keV. For net energy gain, this hot plasma has to be confined at a certain density for a certain time One pro mising scheme to confine such a plasma is the use of i~tense mag netic fields. However, the plasma diffuses out of the confining magnetic surfaces and impinges on the surrounding vessel walls which isolate the plasma from the surrounding air. Because of this plasma wall interaction, particles from the plasma are lost to the walls by implantation and are partially reemitted into the plasma. In addition, wall atoms are released and can enter the plasma. These wall atoms or impurities can deteriorate the plasma performance due to enhanced energy losses through radiation and an increase of the required magnetic pressure or a dilution of the fuel in the plasma. Finally, the impact of the plasma and energy on the wall can modify and deteriorate the thermal and mechanical pro perties of the vessel walls.

Plasma-Material Interaction in Controlled Fusion

Plasma-Material Interaction in Controlled Fusion PDF

Author: Dirk Naujoks

Publisher: Springer

Published: 2006-08-07

Total Pages: 268

ISBN-13: 9783540321484

DOWNLOAD EBOOK →

This book deals with the specific contact between the fourth state of matter, i.e. plasma, and the first state of matter, i.e. a solid wall, in controlled fusion experiments. A comprehensive analysis of the main processes of plasma-surface interaction is given together with an assessment of the most critical questions within the context of general criteria and operation limits. It also contains a survey on other important aspects in nuclear fusion.

Plasma-Material Interaction in Controlled Fusion

Plasma-Material Interaction in Controlled Fusion PDF

Author: Dirk Naujoks

Publisher: Springer

Published: 2010-11-30

Total Pages: 0

ISBN-13: 9783642068775

DOWNLOAD EBOOK →

This book deals with the specific contact between the fourth state of matter, i.e. plasma, and the first state of matter, i.e. a solid wall, in controlled fusion experiments. A comprehensive analysis of the main processes of plasma-surface interaction is given together with an assessment of the most critical questions within the context of general criteria and operation limits. It also contains a survey on other important aspects in nuclear fusion.

Plasma Science and Technology

Plasma Science and Technology PDF

Author: Haikel Jelassi

Publisher: BoD – Books on Demand

Published: 2019-02-27

Total Pages: 330

ISBN-13: 1789852390

DOWNLOAD EBOOK →

Usually called the "fourth state of matter," plasmas make up more than 99% of known material. In usual terminology, this term generally refers to partially or totally ionized gas and covers a large number of topics with very different characteristics and behaviors. Over the last few decades, the physics and engineering of plasmas was experiencing a renewed interest, essentially born of a series of important applications such as thin-layer deposition, surface treatment, isotopic separation, integrated circuit etchings, medicine, etc. Plasma Science

Plasma-Material Interaction in Controlled Fusion

Plasma-Material Interaction in Controlled Fusion PDF

Author: Dirk Naujoks

Publisher: Springer Science & Business Media

Published: 2006-08-25

Total Pages: 279

ISBN-13: 3540321497

DOWNLOAD EBOOK →

This book deals with the specific contact between the fourth state of matter, i.e. plasma, and the first state of matter, i.e. a solid wall, in controlled fusion experiments. A comprehensive analysis of the main processes of plasma-surface interaction is given together with an assessment of the most critical questions within the context of general criteria and operation limits. It also contains a survey on other important aspects in nuclear fusion.