Planning and Design of Roads, Airfields, and Heliports in the Theater of Operations-airfield and Heliport Design

Planning and Design of Roads, Airfields, and Heliports in the Theater of Operations-airfield and Heliport Design PDF

Author: U. S. Government Department of the Army

Publisher: Createspace Independent Publishing Platform

Published: 2013-01-17

Total Pages: 546

ISBN-13: 9781481972031

DOWNLOAD EBOOK →

Field Manual (FM) 5-430 is intended for use as a training guide and reference text for engineer personnel responsible for planning, designing, and constructing roads, airfields, and heliports in the theater of operations (TO). FM 5-430 is divided into two separate volumes to make it more user-friendly. FM 5-430-00-1/AFJPAM 32-8013, vol. 1, Road Design, encompasses Chapters 1 through 9 and Appendices A through H. FM 5-430-00-1/AFJPAM 32-8013, Vol. 1 is a stand-alone volume for the design of TO roads. This volume also serves as a detailed description of information common to both roads and airfields, such as site selection, survey and earthwork, clearing and grubbing, base and subbase courses, and drainage.

Theater of Operations

Theater of Operations PDF

Author: Department of the Army

Publisher:

Published: 2017-08-20

Total Pages: 416

ISBN-13: 9781975605070

DOWNLOAD EBOOK →

The United States Army Engineer School developed this publication with the joint participation of the approving Service commands. The test procedures and terminology used in this manual conform to the latest methods and specifications of the American Society for Testing and Materials (ASTM), the American Concrete Institute, and the Portland Cement Association. The ASTM source publications are not required for testing specified in this document as the procedure is fully explained for military personnel use. This manual, "Theater of Operations: Roads, Airfields, and Heliports - Airfield and Heliport Design," (TM 3-34.48-2 / formerly FM 5-430-00-2) is adopted for use by United States Navy and United States Air Force personnel. Certain tests and procedures prescribed differ in principle or method and are more detailed than counterpart tests that are currently required by the United States Navy for new construction at Navy installations (including those in forward areas). The tests in this manual also apply to arctic construction. However, cold-weather effects present different problems and additional tests will be required for correct evaluation of the materials.

Manuals Combined: U.S. Marine Corps Basic Reconnaissance Course (BRC) References

Manuals Combined: U.S. Marine Corps Basic Reconnaissance Course (BRC) References  PDF

Author:

Publisher:

Published:

Total Pages: 5351

ISBN-13:

DOWNLOAD EBOOK →

Over 5,300 total pages .... MARINE RECON Reconnaissance units are the commander’s eyes and ears on the battlefield. They are task organized as a highly trained six man team capable of conducting specific missions behind enemy lines. Employed as part of the Marine Air-Ground Task Force, reconnaissance teams provide timely information to the supported commander to shape and influence the battlefield. The varying types of missions a Reconnaissance team conduct depends on how deep in the battle space they are operating. Division Reconnaissance units support the close and distant battlespace, while Force Reconnaissance units conduct deep reconnaissance in support of a landing force. Common missions include, but are not limited to: Plan, coordinate, and conduct amphibious-ground reconnaissance and surveillance to observe, identify, and report enemy activity, and collect other information of military significance. Conduct specialized surveying to include: underwater reconnaissance and/or demolitions, beach permeability and topography, routes, bridges, structures, urban/rural areas, helicopter landing zones (LZ), parachute drop zones (DZ), aircraft forward operating sites, and mechanized reconnaissance missions. When properly task organized with other forces, equipment or personnel, assist in specialized engineer, radio, and other special reconnaissance missions. Infiltrate mission areas by necessary means to include: surface, subsurface and airborne operations. Conduct Initial Terminal Guidance (ITG) for helicopters, landing craft, parachutists, air-delivery, and re-supply. Designate and engage selected targets with organic weapons and force fires to support battlespace shaping. This includes designation and terminal guidance of precision-guided munitions. Conduct post-strike reconnaissance to determine and report battle damage assessment on a specified target or area. Conduct limited scale raids and ambushes. Just a SAMPLE of the included publications: BASIC RECONNAISSANCE COURSE PREPARATION GUIDE RECONNAISSANCE (RECON) TRAINING AND READINESS (T&R) MANUAL RECONNAISSANCE REPORTS GUIDE GROUND RECONNAISSANCE OPERATIONS GROUND COMBAT OPERATIONS Supporting Arms Observer, Spotter and Controller DEEP AIR SUPPORT SCOUTING AND PATROLLING Civil Affairs Tactics, Techniques, and Procedures MAGTF Intelligence Production and Analysis Counterintelligence Close Air Support Military Operations on Urbanized Terrain (MOUT) Convoy Operations Handbook TRAINING SUPPORT PACKAGE FOR: CONVOY SURVIVABILITY Convoy Operations Battle Book Tactics, Techniques, and Procedures for Training, Planning and Executing Convoy Operations Urban Attacks

Airplane Performance on Grass Airfields

Airplane Performance on Grass Airfields PDF

Author: Jaroslaw A. Pytka

Publisher: CRC Press

Published: 2023-03-14

Total Pages: 135

ISBN-13: 1000877264

DOWNLOAD EBOOK →

Airplane Performance on Grass Airfields presents an experiment-based approach to analysis and flight testing of airfield performance on grass runways. It discusses improvements for operational efficiency and safety of these airfields. The book analyzes the interaction between the landing gear wheels and the surface of a grass runways during both takeoff and landing. Considering the ground performance of an aircraft on a grass runway, the book covers test methods and devices for measuring performance and introduces an information system for the surface condition of grass airfields: GARFIELD. The system is based on a tire-grass interaction model and uses digital soil maps, as well as current meteorological data obtained from a weather server. The book is intended for researchers and practicing engineers in the fields of aviation and aircraft safety and performance.

Materials Testing

Materials Testing PDF

Author: Department of the Army

Publisher: Lulu.com

Published: 2014-08-24

Total Pages: 375

ISBN-13: 1312426799

DOWNLOAD EBOOK →

This manual provides the technical information necessary for military and other personnel to obtain samples and perform engineering tests and calculations on soils, bituminous paving mixtures, and concrete. These tests and calculations are required to achieve proper design with these materials and adequate control over their use in military and other construction. This manual covers soils, aggregates, bituminous cements, bituminous paving mixtures, Portland cement concrete, and stabilized soil including stabilizing agents such as bitumens, cements, lime, fly ash, and chemical modifiers. The manual gives detailed instructions for taking adequate representative test samples and step-by-step procedures for making physical properties tests and for recording, calculating, and evaluating the test results. The manual describes the tools and equipment for performing these tests and contains general instructions for the care, calibration, and use of test equipment.