-PDF Download- Piping Materials Guide EBOOK

Piping Materials Guide

Author: Peter Smith

Publisher: Elsevier

Published: 2005-01-20

Total Pages: 360

ISBN-13: 9780080480022

The only book of its kind on the market, this book is the companion to our Valve Selection Handbook, by the same author. Together, these two books form the most comprehensive work on piping and valves ever written for the process industries. This book covers the entire piping process, including the selection of piping materials according to the job, the application of the materials and fitting, trouble-shooting techniques for corrosion control, inspections for OSHA regulations, and even the warehousing, distributing, and ordering of materials. There are books on materials, fitting, OSHA regulations, and so on, but this is the only "one stop shopping" source for the piping engineer on piping materials. - Provides a "one stop shopping" source for the piping engineer on piping materials - Covers the entire piping process. - Designed as an easy-to-access guide

Piping Materials

Author: Peter Smith

Publisher:

Published: 2005

Total Pages:

ISBN-13:

DOWNLOAD EBOOK →

Piping Materials Guide

Author: Elsevier

Publisher:

Published:

Total Pages:

ISBN-13: 9780126506426

DOWNLOAD EBOOK →

Piping Handbook

Author: Mohinder L. Nayyar

Publisher: McGraw Hill Professional

Published: 1999-11-04

Total Pages: 2520

ISBN-13: 0071500162

DOWNLOAD EBOOK →

Instant answers to your toughest questions on piping components and systems! It's impossible to know all the answers when piping questions are on the table - the field is just too broad. That's why even the most experienced engineers turn to Piping Handbook, edited by Mohinder L. Nayyar, with contribution from top experts in the field. The Handbook's 43 chapters--14 of them new to this edition--and 9 new appendices provide, in one place, everything you need to work with any type of piping, in any type of piping system: design layout selection of materials fabrication and components operation installation maintenance This world-class reference is packed with a comprehensive array of analytical tools, and illustrated with fully-worked-out examples and case histories. Thoroughly updated, this seventh edition features revised and new information on design practices, materials, practical applications and industry codes and standards--plus every calculation you need to do the job.

Piping Handbook

Author: Mohinder L. Nayyar

Publisher: McGraw-Hill Companies

Published: 1992

Total Pages: 1588

ISBN-13:

DOWNLOAD EBOOK →

/Nayyar/Mohinder L. A total revision of the classic reference on piping design practice, material application, and industry standards. Table of Contents: Definitions, Abbreviations and Units; Piping Components; Piping Materials; Piping Codes and Standards; Manufacturing of Metallic Piping; Fabrication and Installation of Piping; Hierarchy of Design Documents; Design Bases; Piping Layout; Stress Analysis of Piping; Piping Supports; Heat Tracing and Piping; Thermal Insulation of Piping; Flow of Fluids; Piping Systems; Non-Metallic Piping; Thermoplastics Piping; Fiberglass Piping Systems; Conversion Tables; Pipe Properties; Tube Properties; Friction Loss for Water in Feet Per 100 Feet of Pipe. 800 illustrations.

The Engineer's Guide to Plant Layout and Piping Design for the Oil and Gas Industries

Author: Geoff B. Barker

Publisher: Gulf Professional Publishing

Published: 2017-11-25

Total Pages: 532

ISBN-13: 0128146540

DOWNLOAD EBOOK →

The Engineer’s Guide to Plant Layout and Piping Design for the Oil and Gas Industries gives pipeline engineers and plant managers a critical real-world reference to design, manage, and implement safe and effective plants and piping systems for today’s operations. This book fills a training void with complete and practical understanding of the requirements and procedures for producing a safe, economical, operable and maintainable process facility. Easy to understand for the novice, this guide includes critical standards, newer designs, practical checklists and rules of thumb. Due to a lack of structured training in academic and technical institutions, engineers and pipe designers today may understand various computer software programs but lack the fundamental understanding and implementation of how to lay out process plants and run piping correctly in the oil and gas industry. Starting with basic terms, codes and basis for selection, the book focuses on each piece of equipment, such as pumps, towers, underground piping, pipe sizes and supports, then goes on to cover piping stress analysis and the daily needed calculations to use on the job. Delivers a practical guide to pipe supports, structures and hangers available in one go-to source Includes information on stress analysis basics, quick checks, pipe sizing and pressure drop Ensures compliance with the latest piping and plant layout codes and complies with worldwide risk management legislation and HSE Focuses on each piece of equipment, such as pumps, towers, underground piping, pipe sizes and supports Covers piping stress analysis and the daily needed calculations to use on the job

Process Piping

Author: C. Becht

Publisher: American Society of Mechanical Engineers

Published: 2004

Total Pages: 322

ISBN-13:

DOWNLOAD EBOOK →

Provides background information, historical perspective, and expert commentary on the ASME B31.3 Code requirements for process piping design and construction. It provides the most complete coverage of the Code that is available today and is packed with additional information useful to those responsible for the design and mechanical integrity of process piping.

A Practical Guide to Piping and Valves for the Oil and Gas Industry

Author: Karan Sotoodeh

Publisher: Gulf Professional Publishing

Published: 2021-01-12

Total Pages: 986

ISBN-13: 012824187X

DOWNLOAD EBOOK →

A Practical Guide to Piping and Valves for the Oil and Gas Industry covers how to select, test and maintain the right oil and gas valve. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection. Covering both onshore and offshore projects, the book also gives an introduction to the most common types of corrosion in the oil and gas industry, including CO2, H2S, pitting, crevice, and more. A model to evaluate CO2 corrosion rate on carbon steel piping is introduced, along with discussions on bulk piping components, including fittings, gaskets, piping and flanges. Rounding out with chapters devoted to valve preservation to protect against harmful environments and factory acceptance testing, this book gives engineers and managers a much-needed tool to better understand today’s valve technology. Presents oil and gas examples and challenges relating to valves, including many illustrations from valves in different stages of projects Helps readers understand valve materials, testing, actuation, packing and preservation, also including a new model to evaluate CO2 corrosion rates on carbon steel piping Presents structured valve selection tables in each chapter to help readers pick the right valve for the right project

Pocket Guide to Flanges, Fittings, and Piping Data

Author: R. R. Lee

Publisher: Elsevier

Published: 1999-11-03

Total Pages: 160

ISBN-13: 0080514154

DOWNLOAD EBOOK →

Here is the latest edition of a compact reference that has been a real treasure for materials personnel for more than 15 years. Packed with pictures, definitions, and descriptions of ANSI and API piping materials, such as flanges, fittings, bolts, gaskets, and required wrench sizes, it serves as an excellent guide for "rookies" and a ready reference for "old-timers" alike. This compact reference is packed with pictures, definitions, and descriptions of ANSI and API piping materials, such as flanges, fittings, bolts, gaskets, and required wrench sizes. It contains basic information and data to answer common questions that arise in materials handling, pipe fitting, and engineering.

Piping and Pipelines Assessment Guide

Author: Keith Escoe

Publisher: Elsevier

Published: 2006-04-10

Total Pages: 573

ISBN-13: 0080457118

DOWNLOAD EBOOK →

Whether it’s called “fixed equipment (at ExxonMobil), “stationary equipment (at Shell), or “static equipment (in Europe), this type of equipment is the bread and butter of any process plant. Used in the petrochemical industry, pharmaceutical industry, food processing industry, paper industry, and the manufacturing process industries, stationary equipment must be kept operational and reliable for companies to maintain production and for employees to be safe from accidents. This series, the most comprehensive of its kind, uses real-life examples and time-tested rules of thumb to guide the mechanical engineer through issues of reliability and fitness-for-service. This volume on piping and pipeline assessment is the only handbook that the mechanical or pipeline engineer needs to assess pipes and pipelines for reliability and fitness-for-service. * Provides essential insight to make informed decisions on when to run, alter, repair, monitor, or replace equipment* How to perform these type of assessments and calculations on pipelines is a ‘hot' issue in the petrochemical industry at this time* There is very little information on the market right now for pipers and pipeliners with regard to pipe and pipeline fitness-for-service