-PDF Download- Performance Of 8 Cold Climate Envelopes For Passive Houses EBOOK

Performance of 8 Cold-Climate Envelopes for Passive Houses

Author: Rolf Jacobson

Publisher: GRIN Verlag

Published: 2012-09-10

Total Pages: 162

ISBN-13: 3656269963

Master's Thesis from the year 2011 in the subject Art - Architecture / History of Construction, grade: none, University of Minnesota - Twin Cities (College of Design), language: English, abstract: Exterior envelopes for Passive Houses in very cold climates have not been developed, tested, and used as extensively as those in more mild climates such as central Europe. The purpose of this investigation was to push that development further by testing and comparing the performance of a variety of North American and Scandinavian envelope types that have been used in limited numbers for Passive Houses in those regions. A group of eight envelopes were selected and tested with a number of software analyses: Athena life cycle analysis, WUFI hygrothermal modeling, and THERM and EN ISO 6946 2-D U-value calculations for thermal bridging. Finally, the Passive House Planning Package (PHPP) was used to confirm that the envelopes met Passive House energy performance requirements in a very cold climate using a basic passive solar house design. Although significant variation was found in the performance of these eight envelope types, almost all of them were found capable of meeting the energy efficiency and thermal bridging requirements of the Passive House certification in a very cold climate, while maintaining moisture safety, durability, and significant life-cycle energy and carbon savings. These findings demonstrate that even in cold climates, a variety of envelope types can be used successfully for certified Passive Houses. Envelope types: 1) Advanced 2x6 framing24” on center with interior cross strapping and exterior insulation, insulated with mineral wool, 2) Advanced 2x6 framing24” on center, insulated with high-density spray polyurethane foam and exterior rigid foam, 3) Double 2x4 stud wall with studs 16” on center, insulated with blown cellulose, 4) I-joist (TJI) balloon framing 24” on center, insulated with blown fiberglass, 5) Insulated concrete form wall (ICF), using integral rigid EPS foam insulation, 6) Concrete block wall, insulated with exterior mineral wool, 7) Massivtre/Structural engineered panel (SEP), insulated with exterior rigid foam, and 8) Structural insulated panel (SIP), using integral EPS rigid foam insulation. For comparison, a base option was also studied: Standard 2x6 framing 16” on center with fiberglass batt insulation. See Appendix for diagrams of each envelope.

Passive House in Different Climates

Author: Mary James

Publisher: Routledge

Published: 2016-04-20

Total Pages: 216

ISBN-13: 1317446283

DOWNLOAD EBOOK →

Passive House in Different Climates introduces the seven Passive House principles, to help you create super-insulated, airtight buildings that require minimal energy use to heat, cool, dehumidify, and ventilate, with superior indoor air quality and year-round comfort. Seventeen case studies in four climate zones---marine, cold and very cold, mixed-dry and hot-dry, and mixed-humid and hot-humid---and in ten countries, show you how to achieve net-zero energy regardless of where you’re building or what type of building is required. Includes more than 150 color illustrations.

Assessing the Performance of Passive Houses in Mediterranean Climate Regions

Author: Vincenzo Costanzo

Publisher: MDPI

Published: 2020-05-15

Total Pages: 138

ISBN-13: 3039289497

DOWNLOAD EBOOK →

This book results from a Special Issue related to the latest progress in the thermodynamics of machines systems and processes since the premonitory work of Carnot. Carnot invented his famous cycle and generalized the efficiency concept for thermo-mechanical engines. Since that time, research progressed from the equilibrium approach to the irreversible situation that represents the general case. This book illustrates the present state-of-the-art advances after one or two centuries of consideration regarding applications and fundamental aspects. The research is moving fast in the direction of economic and environmental aspects. This will probably continue during the coming years. This book mainly highlights the recent focus on the maximum power of engines, as well as the corresponding first law efficiency upper bounds.

Airflow Performance of Building Envelopes, Components, and Systems

Author: Mark P. Modera

Publisher: ASTM International

Published: 1995

Total Pages: 304

ISBN-13: 0803120230

DOWNLOAD EBOOK →

Discusses the measurement and control of air moving inside buildings and between the inside and outside in 17 papers and discussions from a symposium in Dallas/Fort Worth in October 1993. After an overview of the subject, covers air movement, ventilation, and indoor air quality; window air leakage;

Thermal Inertia in Energy Efficient Building Envelopes

Author: Francesca Stazi

Publisher: Butterworth-Heinemann

Published: 2017-08-29

Total Pages: 374

ISBN-13: 0128139714

DOWNLOAD EBOOK →

The design and construction of the appropriate building envelope is one of the most effective ways for improving a building’s thermal performance. Thermal Inertia in Energy Efficient Building Envelopes provides the optimal solutions, tools and methods for designing the energy efficient envelopes that will reduce energy consumption and achieve thermal comfort and low environmental impact. Thermal Inertia in Energy Efficient Building Envelopes provides experimental data, technical solutions and methods for quantifying energy consumption and comfort levels, also considering dynamic strategies such as thermal inertia and natural ventilation. Several type of envelopes and their optimal solutions are covered, including retrofit of existing envelopes, new solutions, passive systems such as ventilated facades and solar walls. The discussion also considers various climates (mild or extreme) and seasons, building typology, mode of use of the internal environment, heating profiles and cross-ventilation Experimental investigations on real case studies, to explore in detail the behaviour of different envelopes Laboratory tests on existing insulation to quantify the actual performances Analytical simulations in dynamic conditions to extend the boundary conditions to other climates and usage profiles and to consider alternative insulation strategies Evaluation of solutions sustainability through the quantification of environmental and economic impacts with LCA analysis; including global cost comparison between the different scenarios Integrated evaluations between various aspects such as comfort, energy saving, and sustainability

Cold Climate HVAC 2018

Author: Dennis Johansson

Publisher: Springer

Published: 2018-12-12

Total Pages: 1095

ISBN-13: 303000662X

DOWNLOAD EBOOK →

This volume presents the proceedings of the 9th Cold Climate HVAC conference, which was held in Kiruna, Sweden in 2018. The conference highlighted key technologies and processes that allow scientists, designers, engineers, manufacturers and other decision makers in cold climate regions to achieve good indoor environmental quality (IEQ) with a minimum use of energy and other resources. The conference addressed various technical, economic and social aspects of buildings and HVAC systems in new and renovated buildings. This proceedings volume gathers peer-reviewed papers by a diverse and international range of authors and showcases perspectives and practices in cold climate building design from around the globe. The following major aspects, which include both fundamental and theoretical research as well as applications and case studies, are covered: (1) Energy and power efficiency and low-energy buildings; (2) Renovating buildings; (3) Efficient HVAC components; (4) Heat pumps and geothermal systems; (5) Municipal and city energy systems; (6) Construction management; (7) Buildings in operation; (8) Building simulation; (9) Reference data; (10) Transdisciplinary connections and social aspects; (11) Indoor environments and health; (12) Moisture safety and water damage; (13) Codes, regulations, standards and policies; and (14) Other aspects of buildings in cold climates.

Building Thermal Envelope

Author: Jorge de Brito

Publisher: MDPI

Published: 2020-03-27

Total Pages: 244

ISBN-13: 3039285181

DOWNLOAD EBOOK →

This book results from a Special Issue published in Energies, entitled “Building Thermal Envelope". Its intent is to identify emerging research areas within the field of building thermal envelope solutions and contribute to the increased use of more energy-efficient solutions in new and refurbished buildings. Its contents are organized in the following sections: Building envelope materials and systems envisaging indoor comfort and energy efficiency; Building thermal and energy modelling and simulation; Lab test procedures and methods of field measurement to assess the performance of materials and building solutions; Smart materials and renewable energy in building envelope; Adaptive and intelligent building envelope; and Integrated building envelope technologies for high performance buildings and cities.

Sun, Wind & Light

Author: G. Z. Brown

Publisher: Wiley

Published: 2000-11-07

Total Pages: 400

ISBN-13: 9780471348771

DOWNLOAD EBOOK →

Architecture/Environment How to design buildings that heat with the sun, cool with the wind, light with the sky, and move into the future using on-site renewable resources Developed for rapid use during schematic design, this book clarifies relationships between form and energy and gives designers tools for designing sustainably. It also: * Applies the latest passive energy and lighting design research * Organizes information by architectural elements at three scales: * building groups, individual buildings, and building parts * Brings design strategies to life with examples and practical design tools * Features: * 109 analysis techniques and design strategies * More than 750 illustrations, sizing graphs, and tables * Both inch-pound and metric units

Structures and Architecture. A Viable Urban Perspective?

Author: Marie Frier Hvejsel

Publisher: CRC Press

Published: 2022-07-07

Total Pages: 578

ISBN-13: 1000786102

DOWNLOAD EBOOK →

Structures and Architecture. A Viable Urban Perspective? contains extended abstracts of the research papers and prototype submissions presented at the Fifth International Conference on Structures and Architecture (ICSA2022, Aalborg, Denmark, 6-8 July 2022). The book (578 pages) also includes a USB with the full texts of the papers (1448 pages). The contributions on creative and scientific aspects in the conception and construction of structures as architecture, and on the role of advanced digital-, industrial- and craft -based technologies in this matter represent a critical blend of scientific, technical, and practical novelties in both fields. Hence, as part of the proceedings series Structures and Architecture, the volume adds to a continuous exploration and development of the synergetic potentials of the fields of Structures and Architecture. With each volume further challenging the conditions, problems, and potentials related to the art, practice, and theory of teaching, researching, designing, and building structures as vehicles towards a viable architecture of the urban environment. The volumes of the series appear once every three years, in tandem with the conferences organized by the International Association of Structures and Architecture and are intended for a global readership of researchers, practitioners, and students, including architects, structural and construction engineers, builders and building consultants, constructors, material suppliers, planners, urban designers, anthropologists, economists, sociologists, artists, product manufacturers, and other professionals involved in the design and realization of architectural, structural, and infrastructural projects.

Nearly Zero Energy Buildings and Proliferation of Microorganisms

Author: Elisa Di Giuseppe

Publisher: Springer Science & Business Media

Published: 2013-10-22

Total Pages: 99

ISBN-13: 331902356X

DOWNLOAD EBOOK →

This book provides a concise review of the thermo-physical phenomena which regulate heat and moisture transportation in Nearly Zero Energy Buildings envelopes, and their relationship with the growth of biological organisms. It describes the main microorganisms proliferating on contemporary building elements and within buildings. It also states the consequences of biological growth on durability, aesthetics and human health; and provides the main methods for the analytical and experimental evaluation of proliferation. Finally, through the review of recent developments, remedial actions to counter the biological phenomenon are examined, and an outline is provided for future innovations in a field not yet widely investigated.