Structural Materials Technology

Structural Materials Technology PDF

Author: Paul E. Hartbower

Publisher: CRC Press

Published: 2020-08-23

Total Pages: 417

ISBN-13: 1000125211

DOWNLOAD EBOOK →

This book is a collection of papers presented in the NDT Conference held on February 20-23, 1996 at San Diego, California. The conference provided an opportunity to share experience and provide additional input to the Federal Highway Administration.

Non-Destructive Testing in Civil Engineering 2000

Non-Destructive Testing in Civil Engineering 2000 PDF

Author: T. Uomoto

Publisher: Elsevier

Published: 2000-03-31

Total Pages: 697

ISBN-13: 0080545351

DOWNLOAD EBOOK →

The first international symposium on NDT-CE (Non-Destructive Testing in Civil Engineering) was held in Berlin, Germany in 1991. Successive symposia were held throughout Europe until 1997. This, the 5th symposium is organized as SEIKEN SYMPOSIUM No. 26, and is sponsored by the Institute of Industrial Science, at the University of Tokyo, Japan. Original objectives of the NDT-CE symposium have been to provide an opportunity for discussing current issues and future perspectives of NDT and for promoting mutual understanding among engineers and researchers. Asia is one of the key regions for further development in NDT and this symposium in Japan will be a good opportunity not only to exchange technical information on NDT, but to promote worldwide friendship between engineers in Asian countries and other nations of the world. This volume contains 70 papers providing the most recent research results and findings. The papers are grouped under the following areas: (1) keynote papers, (2) magnetic / electric, (3) steel structures, (4) integrated test, (5) moisture, (6) strength, (7) acoustic emission, (8) various tests, (9) ultrasonic, (10) impact echo, (11) radar, (12) quality and (13) corrosion / cover.

Acceptance Criteria of Complete Joint Penetration Steel Bridge Welds Evaluated Using Enhanced Ultrasonic Methods

Acceptance Criteria of Complete Joint Penetration Steel Bridge Welds Evaluated Using Enhanced Ultrasonic Methods PDF

Author: Robert J. Connor

Publisher:

Published: 2019

Total Pages: 75

ISBN-13: 9780309480444

DOWNLOAD EBOOK →

Presents guidelines for evaluating complete joint penetration (CJP) welds in steel bridges and proposes modifications to the American Association of State Highway and Transportation Officials (AASHTO)/American Welding Society (AWS) D1.5. Inspection of welds in steel bridges is necessary to ensure the quality of workmanship during the fabrication and construction process and later on when the bridge is in service. There are two non-destructive evaluation (NDE) methods for evaluation of complete joint penetration (CJP) welds in steel bridges: radiographic (RT) and ultrasonic (UT). Recent advances in enhanced ultrasonic methods, including the development of phased-array ultrasonic technology (PAUT), allow for efficient detection and characterization of flaws with the option of automated data collection and imaging. Criteria for categorizing weld discontinuities as acceptable or unacceptable are codified in the AASHTO/AWS D1.5M/D1.5: Bridge Welding Code (BWC). However, these acceptance criteria do not reflect the full use of the capability of enhanced ultrasonic testing methods, and furthermore are not based on the effect of weld discontinuities on bridge performance (e.g., resistance to fatigue and fracture). In addition, some weld discontinuities that are not allowed according to BWC are potentially not harmful and may not decrease service life. An updated acceptance criteria based on enhanced ultrasonic testing methods for evaluation of CJP welds in steel bridges was needed for fabricators and bridge owners.

Lanterna Rally - Theme by Grace Themes