Methods for Wastewater Characterization in Activated Sludge Modelling

Methods for Wastewater Characterization in Activated Sludge Modelling PDF

Author: Henryk Melcer

Publisher: IWA Publishing

Published: 2004-11-01

Total Pages: 600

ISBN-13: 1843396629

DOWNLOAD EBOOK →

Mathematical modeling is a useful tool for the design, analysis and control of wastewater treatment systems. The activated sludge process is one of the most common processes used in wastewater treatment, and therefore is a particularly important candidate for the application of mathematical models. In the 1980s, a task group organized by the International Association on Water Quality (IAWQ) developed a conceptual model of the activated sludge process, which has become an industry-wide standard for the development of computer-based activated sludge models. A recent version of the IAWQ model incorporates 19 components, 17 processes, and numerous rate and stoichiometric coefficients. It is difficult and costly to quantify all of the necessary coefficients for any given application of the model; consequently, it is important to identify the most critical wastewater and biomass components and the relevant coefficients to be quantified for the most common uses of the model. It is also important to provide guidance to potential model users on the use of default and/or estimated values for the remaining parameters.

Activated Sludge Models

Activated Sludge Models PDF

Author: The IWA Task Group on Mathematical Modelling for Design and Operation of Biological Wastewater Treatment

Publisher: IWA Publishing

Published: 2000-05-31

Total Pages: 132

ISBN-13: 9781900222242

DOWNLOAD EBOOK →

This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9

Formation, characterization and mathematical modeling of the aerobic granular sludge

Formation, characterization and mathematical modeling of the aerobic granular sludge PDF

Author: Bing-Jie Ni

Publisher: Springer Science & Business Media

Published: 2012-07-25

Total Pages: 349

ISBN-13: 3642312810

DOWNLOAD EBOOK →

Aerobic granular sludge technology will play an important role as an innovative technology alternative to the present activated sludge process in industrial and municipal wastewater treatment in the near future. Intended to fill the gaps in the studies of aerobic granular sludge, this thesis comprehensively investigates the formation, characterization and mathematical modeling of aerobic granular sludge, through integrating the process engineering tools and advanced molecular microbiology. The research results of this thesis contributed significantly to the advance of understanding and optimization of the bacterial granulation processes, the next generation of technology for cost-effective biological wastewater treatment. Dr. Bing-Jie Ni works at Advanced Water Management Centre (AWMC) of The University of Queensland, Australia.

Mathematical Modelling and Computer Simulation of Activated Sludge Systems

Mathematical Modelling and Computer Simulation of Activated Sludge Systems PDF

Author: Jacek Makinia

Publisher: IWA Publishing

Published: 2010-08-31

Total Pages: 401

ISBN-13: 1843392380

DOWNLOAD EBOOK →

This international, comprehensive guide to modeling and simulation studies in activated sludge systems leads the reader through the entire modeling process – from building a mechanistic model to applying the model in practice. Mathematical Modelling and Computer Simulation of Activated Sludge Systems will: Enhance the readers’ understanding of different model concepts for several (most essential) biochemical processes in the advanced activated sludge systems Provide extensive and up-to-date coverage of experimental methodologies of a complete model parameter estimation (longitudinal dispersion coefficient, influent wastewater fractions, kinetic and stoichiometric coefficients, settling velocity, etc.) Summarize and critically review the ranges of model parameters reported in literature Compare the existing protocols aiming at a systematic organization of the simulation study Outline the capabilities of the existing commercial simulators Present documented, successful case studies of practical model applications as a guide while planning a simulation study. The book is organized to provide a general background and some basic definitions, then theoretical aspects of modeling and finally, the issues important for practical model applications. Mathematical Modelling and Computer Simulation of Activated Sludge Systems can be used as supplementary material for a graduate level wastewater engineering courses and is useful to a wide audience of researchers and practitioners. Experienced model users such as consultants, trained plant management staff may find the book useful as a reference and as a resource for self-guided study. Visit the IWA WaterWiki to read and share material related to this title: http://www.iwawaterwiki.org/xwiki/bin/view/Articles/MathmematicalModellingandActivatedSludgeSystems

Guidelines for Using Activated Sludge Models

Guidelines for Using Activated Sludge Models PDF

Author: Leiv Rieger

Publisher: IWA Publishing

Published: 2012-09-14

Total Pages: 287

ISBN-13: 1843391740

DOWNLOAD EBOOK →

Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22

Lanterna Rally - Theme by Grace Themes