Mechanics of Transformation Toughening and Related Topics

Mechanics of Transformation Toughening and Related Topics PDF

Author: J.H. Andreasen

Publisher: Elsevier

Published: 1996-05-01

Total Pages: 523

ISBN-13: 9780080536040

DOWNLOAD EBOOK →

Since the benefit of stress-induced tetragonal to monoclinic phase transformation of confined tetragonal zirconia particles was first recognized in 1975, the phenomenon has been widely studied and exploited in the development of a new class of materials known as transformation toughened ceramics (TTC). In all materials belonging to this class, the microstructure is so controlled that the tetragonal to monoclinic transformation is induced as a result of a high applied stress field rather than as a result of cooling the material below the martensitic start temperature. The significance of microstructure to the enhancement of thermomechanical properties of TTC is now well understood, as are the mechanisms that contribute beneficially to their fracture toughness. The micromechanics of these mechanisms have been extensively studied and are therefore presented here in a cogent manner. The authors also review dislocation formalism for the modelling of cracks and Eshelby's technique. In compiling this monograph the authors present the most up-to-date and complete review of the field and include several topics which have only recently been fully investigated.

Transformation Toughening Of Ceramics

Transformation Toughening Of Ceramics PDF

Author: David J. Green

Publisher: CRC Press

Published: 2018-02-06

Total Pages: 379

ISBN-13: 1351094300

DOWNLOAD EBOOK →

The aim of this book is to provide a coherent and up-to-date discussion of the scientific work concerning the transformation toughening of ceramics. We hope the book is useful to scientists, engineers and students who are new to these materials. It is intended both as a source of learning and information to those who are new to these materials. It is intended both as a source of learning behaviour and microstructural relationships in transformation-toughened ceramics. While it has been our aim to present a book that is current as possible at the time of publication, the subject is still expanding in many areas; so our hope is that the reader will also gain an insight into the direction of future advances.

Comprehensive Structural Integrity

Comprehensive Structural Integrity PDF

Author: Ian Milne

Publisher: Elsevier

Published: 2003-07-25

Total Pages: 4647

ISBN-13: 0080490735

DOWNLOAD EBOOK →

The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.

Topics in Applied Mechanics

Topics in Applied Mechanics PDF

Author: J.F. Dijksman

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 381

ISBN-13: 9401120900

DOWNLOAD EBOOK →

In collaboration with the Contact Group Experimental Mechanics in The Netherlands and under the auspices of the Technological Institute of the Koninklijke Vlaamse Ingenieurs Vereniging (Royal Flemish Society of Engineers), the Department of Ap plied Mechanics of the Koninklijk Instituut van Ingenieurs (Royal Institution of Engineers in The Netherlands) organised the second National Mechanics Congress in The Netherlands, on November 16-18, 1992. About hundred participants from universities and industrial research laboratories in The Netherlands and Belgium discussed topics around the theme: Building Bridges, Integration of Theory and Applications in Applied Mechanics. Building bridges is of course one of the main tasks of a civil engineer, in order to improve the infrastructure of our society. Strength, stiffness and stability have to be guaranteed for a large number of years of service. Localised effects such as shear lag in longitudinal stiffeners, small cracks in concrete structures and effects of corrosion may on the long tenn lead to catastrofic failure of bridges. During the congress J.P. Gailliez presented a talk about the hydraulic ship lifts in the Canal du Centre in south Belgium. Built more than a hundred years ago, the elevators still are in a perfect condition and are recognized now as an industrial archeological monument.

Theoretical and Applied Mechanics

Theoretical and Applied Mechanics PDF

Author: P. Germain

Publisher: Elsevier

Published: 2012-12-02

Total Pages: 495

ISBN-13: 0444600205

DOWNLOAD EBOOK →

Contained in this volume are the full texts of the invited general and sectional lectures presented at this conference. The entire field of mechanics is covered, including analytical, solid and fluid mechanics and their applications. Invited papers on the following topics are also presented: Mechanics of large deformation and damage; The dynamics of two-phase flows; Mechanics of the earth's crust. The papers are written by leading experts and provide a valuable key to the latest and most important developments in various sub-fields of mechanics.

Fracture of Non-Metallic Materials

Fracture of Non-Metallic Materials PDF

Author: K.P. Herrmann

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 401

ISBN-13: 9400947844

DOWNLOAD EBOOK →

This book contains the lectures of the 5th Advanced Seminar on Fracture Mechanics (ASFM 5) held at the Joint Research Centre, Ispra, on 14-18 October 1985. The series of the ASFMs is one of the two main regularly scheduled international events sponsored by the European Group on Fracture (EGF) , alternating with the European Conferences of Fracture (ECFS). Whereas ECFs are held in a different place on even years (the last. ECF6,was in Amsterdam in June 1986), ASFMs are hosted at the JRC Ispra on odd years. This establishment belonging to the Commission of the European Communities performs research work of common interest to the EC Member countries. One of the activities of the JRC-Ispra is the organization of Ispra-Courses aiming at the transfer of knowledge and the strengthening of exchanges and ties between European scientific workers. ASFMs are designed to give an advanced level treatment in selected areas of fracture mechanics. Previous ASFMs had been devoted to elastic-plastic fracture mechanics and to subcritical crack growth due to fatigue, stress corrosion and creep. In the early stages of preparation of ASFM5 it was decided to concentrate on a new theme, the fracture phenomena and fracture mechanics of non-metallic materials. Whereas fracture mechanics started with the study of glass by Griffith, its later developments centered predominantly on metallic alloys. However, in recent years non-metallic materials have found increasing uses and correspondingly efforts have been made to develop testing and prediction methods for these materials.

IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures

IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures PDF

Author: Alan Cocks

Publisher: Springer Science & Business Media

Published: 2012-09-26

Total Pages: 309

ISBN-13: 9400749112

DOWNLOAD EBOOK →

This volume constitutes the proceedings of the IUTAM Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures, held in Beijing, 8-12 August, 2010. The symposium brought together the most active scientists working in this area from the fields of solid mechanics, composites, physics, and materials science and summarized the state-of-the-art research results with a view to advancing the frontiers of mechanics and materials physics. Nanomaterials and heterostructures have a large fraction of their atoms at surfaces and interfaces. These atoms see a different environment to those in the interior and can have a substantial effect on the overall mechanical and physical behaviour of a material. The last decade has witnessed a growing interest in the study of surfaces and how the surface behaviour couples with that of the bulk to determine the overall system response. The papers in this proceedings cover: extension of continuum mechanics and thermodynamics to the nano-scale; multiscale simulations; surface effects in monolithic nano-scale elements and nanostructures; mechanical and physical properties of nanomaterials and heterostructures; self-assembly, etc. The surface stress effect is inherently a multidisciplinary and fertile field; the Symposium truly reflects these features. This IUTAM Symposium was also dedicated to Professor Bhushan L Karihaloo of Cardiff University on his impending retirement, in recognition of his contributions to the fields of solid mechanics and nanomechanics, and to IUTAM activities in general.

Lanterna Rally - Theme by Grace Themes