Author: Md Khurshedul Islam
Publisher:
Published: 2023
Total Pages: 0
ISBN-13:
DOWNLOAD EBOOK →
The demand for ultra-high-speed machines (UHSM) is rapidly growing in high-tech industries due to their attractive features. A-mechanically-based-antenna (AMEBA) system is another emerging application of UHSM. It enables portable wireless communication in the radio frequency (RF)-denied environment, which was not possible until recently. The AMEBA system requires a high-power (HP) UHSM for its effective communication performance. However, at the expected rotational speed range of 0.5 to 1 million rpm, the power level of UHSM is limited, and no research effort has succeeded to improve the power level of UHSM. The design of HP-UHSM is highly iterative, and it presents several critical challenges, unlike low-power UHSM, such as critical-bending-resonance (CBR), strong mutual influence among Multiphysics performances, exponential air-friction loss, and material limitation. When the magnetic loading of the UHSM rotor is increased to improve the power level, the rotor experiences serious mechanical vibration due to the excessive centrifugal forces and CBR. This vibration limits the operation of HP-UHSM and leads to structural breakdown. Furthermore, the design process becomes more critical when it considers the multidisciplinary design constraints and application requirements. This dissertation proposed a new Multiphysics design method to develop HP-UHSM for critical applications. First, the critical design constraints which prevent increasing the output power of UHSM are investigated. Then, a Multiphysics optimization model is developed by coupling several multidisciplinary analysis modules. This proposed optimization model enables (i) defining multidisciplinary design constraints, (ii) consideration of Multiphysics mutual influence, and (iii) a trade-off analysis between the efficiency and design-safety-margin. The proposed design model adopts the multiphase winding system to effectively increase the electrical loading in the slotless stator. Finally, a 2000 W 500,000 rpm HP-UHSM is optimized for an AMEBA system using the proposed design method. The optimized 2 kW 500,000 rpm machine prototype and its dynamo setup are built in the laboratory. Extensive finite element simulations and experimental testing results are presented to validate the effectiveness of the proposed design method. The results show that the proposed HP-USHM has 94.5% efficiency, 47 kW/L power density, 30% global design safety margin at the maximum speed and no CBR frequency below 11 kHz.