eBook PDF Download Digital Library
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2017-02-11
Total Pages: 25
ISBN-13:
DOWNLOAD EBOOK →This Standard specifies the technical requirements, test methods and acceptance rules of cast iron for fans blower and compressors.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2018-10-19
Total Pages: 8
ISBN-13:
DOWNLOAD EBOOK →This standard specifies the marking content, marking pattern, marking method and size, paint color of valve of various general-purpose valves. This standard applies to all types of general-purpose valves.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2015-08-22
Total Pages: 23
ISBN-13:
DOWNLOAD EBOOK →This Standard specifies the product classification, basic parameters, connection dimension, usability, technical conditions, test methods, inspection rules, marking, packaging, storage, transportation, etc. of flared (nominal inner-diameter of 5mm~31.5mm), ferrule (nominal inner-diameter of 5mm~38mm), welding (or quick-change, nominal inner-diameter of 5mm~51mm), flange, and 24-degree cone sealing steel wire reinforced hydraulic rubber hose assemblies and steel-wire-wound reinforced hydraulic rubber hose assemblies.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2018-01-01
Total Pages: 667
ISBN-13:
DOWNLOAD EBOOK →This document provides the comprehensive list of Chinese Industry Standards - Category: JB; JB/T; JBT.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2015-02-02
Total Pages: 26
ISBN-13:
DOWNLOAD EBOOK →This Part of JB/T 1647 specifies the technical requirements, test methods, inspection rules, packaging, labeling, and transport of the straight-side power-press. This Part applies to straight-side single-, dual-, four-point mechanical power presses. It also applies to straight-side single, double, four-point trimming power-presses. This Part does not apply to hot forging power-presses, closed high-speed power-presses, and other special power-presses.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2016-01-10
Total Pages: 34
ISBN-13:
DOWNLOAD EBOOK →This Standard specifies the metallographic-structure grade-level, inspection and examination methods for internal combustion engines casting eutectic aluminumsilicon alloy pistons AND aluminum-silicon-copper-magnesium (Al-Si-Cu-Mg) alloy pistons.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2014-09-27
Total Pages: 8
ISBN-13:
DOWNLOAD EBOOK →This standard specifies the technical requirements, inspection, marking, packaging and storage of polyfluortetraethylene gasket. This standard is applicable to polyfluortetraethylene gasket.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2019-03-05
Total Pages: 15
ISBN-13:
DOWNLOAD EBOOK →This Part of the JB/T 5000 specifies the ultrasonic, magnetic-powder and penetration testing methods and quality grades of forged steel. This Part applies to non-destructive testing of forged steel for heavy machinery. Non-destructive testing methods as specified in this Part may involve hazardous materials, operations and equipment, so the non-destructive testing personnel shall comply with relevant safety and health regulations.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2017-04-02
Total Pages: 27
ISBN-13:
DOWNLOAD EBOOK →This part of JB/T 6758 specifies the type, product variety structure, technical requirements, acceptance rules and packaging marking of the continuously transposed conductors. This part shall be used in conjunction with the subsequent product standard parts of JB/T 6758.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2018-03-30
Total Pages: 11
ISBN-13:
DOWNLOAD EBOOK →This Standard specifies the determination methods for the types, technical requirements, testing devices, shot strength and covert rate of projectile used for shot-peening. This Standard is applicable to the inspection on shot-peening for steel-iron parts.
