-PDF Download- Ih Srs 706 756 806 856 1206 EBOOK

Assessment of Inertial Confinement Fusion Targets

Author: National Research Council

Publisher: National Academies Press

Published: 2013-07-17

Total Pages: 119

ISBN-13: 0309270626

In the fall of 2010, the Office of the U.S. Department of Energy's (DOE's) Secretary for Science asked for a National Research Council (NRC) committee to investigate the prospects for generating power using inertial confinement fusion (ICF) concepts, acknowledging that a key test of viability for this concept-ignition -could be demonstrated at the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) in the relatively near term. The committee was asked to provide an unclassified report. However, DOE indicated that to fully assess this topic, the committee's deliberations would have to be informed by the results of some classified experiments and information, particularly in the area of ICF targets and nonproliferation. Thus, the Panel on the Assessment of Inertial Confinement Fusion Targets ("the panel") was assembled, composed of experts able to access the needed information. The panel was charged with advising the Committee on the Prospects for Inertial Confinement Fusion Energy Systems on these issues, both by internal discussion and by this unclassified report. A Panel on Fusion Target Physics ("the panel") will serve as a technical resource to the Committee on Inertial Confinement Energy Systems ("the Committee") and will prepare a report that describes the R&D challenges to providing suitable targets, on the basis of parameters established and provided to the Panel by the Committee. The Panel on Fusion Target Physics will prepare a report that will assess the current performance of fusion targets associated with various ICF concepts in order to understand: 1. The spectrum output; 2. The illumination geometry; 3. The high-gain geometry; and 4. The robustness of the target design. The panel addressed the potential impacts of the use and development of current concepts for Inertial Fusion Energy on the proliferation of nuclear weapons information and technology, as appropriate. The Panel examined technology options, but does not provide recommendations specific to any currently operating or proposed ICF facility.

History of Hydrogenation, Shortening and Margarine (1860-2020)

Author: William Shurtleff; Akiko Aoyagi

Publisher: Soyinfo Center

Published: 2020-06-05

Total Pages: 1159

ISBN-13: 1948436183

DOWNLOAD EBOOK →

One of the world's most comprehensive, well documented and well illustrated books on this subject, With extensive subject and geographic index. 106 photographs and illustrations - mostly color. Free of charge in digital format on Google Books.

Dividing the Droplet

Author: James De Barro

Publisher:

Published: 2006

Total Pages: 18

ISBN-13: 9781741511796

DOWNLOAD EBOOK →

This report includes rationale for the research, a brief outline of the methodology and the summarised data collected from the project. The results are presented in a format that can be used both by irrigators, the irrigation industry, as well as the Department of Water, Land and Biodiversity Conservation as part of the licence conversion process.

An Assessment of the Prospects for Inertial Fusion Energy

Author: National Research Council

Publisher: National Academies Press

Published: 2013-07-05

Total Pages: 247

ISBN-13: 0309272246

DOWNLOAD EBOOK →

The potential for using fusion energy to produce commercial electric power was first explored in the 1950s. Harnessing fusion energy offers the prospect of a nearly carbon-free energy source with a virtually unlimited supply of fuel. Unlike nuclear fission plants, appropriately designed fusion power plants would not produce the large amounts of high-level nuclear waste that requires long-term disposal. Due to these prospects, many nations have initiated research and development (R&D) programs aimed at developing fusion as an energy source. Two R&D approaches are being explored: magnetic fusion energy (MFE) and inertial fusion energy (IFE). An Assessment of the Prospects for Inertial Fusion Energy describes and assesses the current status of IFE research in the United States; compares the various technical approaches to IFE; and identifies the scientific and engineering challenges associated with developing inertial confinement fusion (ICF) in particular as an energy source. It also provides guidance on an R&D roadmap at the conceptual level for a national program focusing on the design and construction of an inertial fusion energy demonstration plant.

Insulation Sleeving, Electrical

Author: Defense Logistics Services Center (U.S.)

Publisher:

Published: 1969

Total Pages: 52

ISBN-13:

DOWNLOAD EBOOK →

Microbial Decontamination in the Food Industry

Author: Ali Demirci

Publisher: Elsevier

Published: 2012-06-26

Total Pages: 841

ISBN-13: 0857095757

DOWNLOAD EBOOK →

The problem of creating microbiologically-safe food with an acceptable shelf-life and quality for the consumer is a constant challenge for the food industry. Microbial decontamination in the food industry provides a comprehensive guide to the decontamination problems faced by the industry, and the current and emerging methods being used to solve them.Part one deals with various food commodities such as fresh produce, meats, seafood, nuts, juices and dairy products, and provides background on contamination routes and outbreaks as well as proposed processing methods for each commodity. Part two goes on to review current and emerging non-chemical and non-thermal decontamination methods such as high hydrostatic pressure, pulsed electric fields, irradiation, power ultrasound and non-thermal plasma. Thermal methods such as microwave, radio-frequency and infrared heating and food surface pasteurization are also explored in detail. Chemical decontamination methods with ozone, chlorine dioxide, electrolyzed oxidizing water, organic acids and dense phase CO2 are discussed in part three. Finally, part four focuses on current and emerging packaging technologies and post-packaging decontamination.With its distinguished editors and international team of expert contributors, Microbial decontamination in the food industry is an indispensable guide for all food industry professionals involved in the design or use of novel food decontamination techniques, as well as any academics researching or teaching this important subject. Provides a comprehensive guide to the decontamination problems faced by the industry and outlines the current and emerging methods being used to solve them Details backgrounds on contamination routes and outbreaks, as well as proposed processing methods for various commodities including fresh produce, meats, seafood, nuts, juices and dairy products Sections focus on emerging non-chemical and non-thermal decontamination methods, current thermal methods, chemical decontamination methods and current and emerging packaging technologies and post-packaging decontamination

Advanced Dynamics of Rolling Elements

Author: P.K. Gupta

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 307

ISBN-13: 1461252768

DOWNLOAD EBOOK →

In any rotating machinery system, the bearing has traditionally been a crit ical member of the entire system, since it is the component that permits the relative motion between the stationary and moving parts. Depending on the application, a number of different bearing types have been used, such as oil-lubricated hydrodynamic bearings, gas bearings, magnetic suspensions, rolling element bearings, etc. Hydrodynamic bearings can provide any desired load support, but they are limited in stiffness and the associated power loss may be quite large. Gas bearings are used for high-precision applications where the supported loads are relatively light, bearing power losses are very low, and the rotating speeds generally high. For super precision components where no frictional dissipation or bearing power loss can be tolerated, magnetic suspensions are employed; again, the load support requirements are very low. Rolling element bearings have been widely used for those applications that require greater bearing versatility, due to the requirements for high-load and high-stiffness characteristics, while allowing moderate power loss and permitting variable speeds. A study of the dynamic interaction of rolling elements is, therefore, the subject of this text. Texts covering the analysis and design methodology of rolling elements are very limited. Notable works include Analysis of Stresses and Deflections (Jones, 1946, Vols. I and II), Ball and Roller Bearings, Their Theory, Design and Application (Eschmann, Hasbargen, and Weigand, 1958), Ball and Roller Bearing Engineering (Palmgren, 1959, 3rd ed. ), Advanced Bearing Technology (Bisson and Anderson, 1965), and Rolling Bearing Analysis (Harris, 1966).

Hamito-Semitic Etymological Dictionary

Author: Vladimir E. Orel

Publisher: BRILL

Published: 2015-11-02

Total Pages: 619

ISBN-13: 9004293957

DOWNLOAD EBOOK →

The Hamito-Semitic Etymological Dictionary, a project in the making since 1986, is the first dictionary to reflect the vocabulary of the extinct Proto-Hamito-Semitic (Proto-Afro-Asiatic) language. Reconstructed on the basis of Semitic, Ancient Egyptian, Berber, Chadic and Cushitic linguistic groups, the Dictionary plays an indispensable role in further research into the field of historical linguistics. It surpasses by far the only comparable work to date, M. Cohen's Essai comparatif sur le vocabulaire et la phonetique du chamito-semitique, published in 1947, which contains much less material and is now outdated. The Dictionary comprises more than 2,500 lexical items and includes an introduction providing valuable information on the historical phonology of Hamito-Semitic as well as an index of meanings, which supplies linguistics, archaeologists and scholars of ancient history with added insight into the culture of the ancient speakers of Proto-Hamito-Semitic. An invaluable contribution to the field of Afro-Asiatic Studies, The Hamito-Semitic Etymological Dictionary will be used and discussed by scholars for years to come.

Housing New York 2.0

Author:

Publisher:

Published: 2017

Total Pages: 33

ISBN-13:

DOWNLOAD EBOOK →

"Since Mayor de Blasio launched the Housing New York Plan in 2014, New York City has accelerated the construction and preservation of affordable housing to levels not seen in 30 years. We are on track to secure more affordable housing in the first four years of the Administration than in any comparable period since 1978. The City has tripled the share of affordable housing for households earning less than $25,000. Funding for housing construction and preservation has doubled, as have the number of homes in the City’s affordable housing lotteries each year. Hundreds of once-vacant lots have affordable homes rising on them today. Reforms to zoning and tax programs are not just incentivizing, but mandating affordable apartments—paid for by the private sector— in new development." --Page 4.