Ice Accretions and Icing Effects for Modern Airfoils

Ice Accretions and Icing Effects for Modern Airfoils PDF

Author: Harold E. Addy

Publisher:

Published: 2000

Total Pages: 292

ISBN-13:

DOWNLOAD EBOOK →

Icing tests were conducted to document ice shapes formed on three different two-dimensional airfoils and to study the effects of the accreted ice on aerodynamic performance. The models tested were representative of airfoil designs in current use for each of the commercial transport, business jet, and general aviation categories of aircraft. The models were subjected to a range of icing conditions in an icing wind tunnel. The conditions were selected primarily from the Federal Aviation Administration's Federal Aviation Regulations 25 Appendix C atmospheric icing conditions. A few large droplet icing conditions were included. To verify the aerodynamic performance measurements, molds were made of selected ice shapes formed in the icing tunnel. Castings of the ice were made from the molds and placed on a model in a dry, low-turbulence wind tunnel where precision aerodynamic performance measurements were made. Documentation of all the ice shapes and the aerodynamic performance measurements made during the icing tunnel tests is included in this report. Results from the dry, low-turbulence wind tunnel tests are also presented.

Ice Accretions and Icing Effects for Modern Airfoils

Ice Accretions and Icing Effects for Modern Airfoils PDF

Author: National Aeronautics and Space Administration (NASA)

Publisher: Createspace Independent Publishing Platform

Published: 2018-06-27

Total Pages: 292

ISBN-13: 9781721934102

DOWNLOAD EBOOK →

Icing tests were conducted to document ice shapes formed on three different two-dimensional airfoils and to study the effects of the accreted ice on aerodynamic performance. The models tested were representative of airfoil designs in current use for each of the commercial transport, business jet, and general aviation categories of aircraft. The models were subjected to a range of icing conditions in an icing wind tunnel. The conditions were selected primarily from the Federal Aviation Administration's Federal Aviation Regulations 25 Appendix C atmospheric icing conditions. A few large droplet icing conditions were included. To verify the aerodynamic performance measurements, molds were made of selected ice shapes formed in the icing tunnel. Castings of the ice were made from the molds and placed on a model in a dry, low-turbulence wind tunnel where precision aerodynamic performance measurements were made. Documentation of all the ice shapes and the aerodynamic performance measurements made during the icing tunnel tests is included in this report. Results from the dry, low-turbulence wind tunnel tests are also presented. Addy, Harold E., Jr. Glenn Research Center RTOP 548-21-23

Ice Accretions and Icing Effects for Modern Airfoils

Ice Accretions and Icing Effects for Modern Airfoils PDF

Author: Harold E. Addy

Publisher:

Published: 2000

Total Pages: 292

ISBN-13:

DOWNLOAD EBOOK →

Icing tests were conducted to document ice shapes formed on three different two-dimensional airfoils and to study the effects of the accreted ice on aerodynamic performance. The models tested were representative of airfoil designs in current use for each of the commercial transport, business jet, and general aviation categories of aircraft. The models were subjected to a range of icing conditions in an icing wind tunnel. The conditions were selected primarily from the Federal Aviation Administration's Federal Aviation Regulations 25 Appendix C atmospheric icing conditions. A few large droplet icing conditions were included. To verify the aerodynamic performance measurements, molds were made of selected ice shapes formed in the icing tunnel. Castings of the ice were made from the molds and placed on a model in a dry, low-turbulence wind tunnel where precision aerodynamic performance measurements were made. Documentation of all the ice shapes and the aerodynamic performance measurements made during the icing tunnel tests is included in this report. Results from the dry, low-turbulence wind tunnel tests are also presented.

Ice Accretion and Icing Technology

Ice Accretion and Icing Technology PDF

Author: Robert J Flemming

Publisher: SAE International

Published: 2015-04-16

Total Pages: 122

ISBN-13: 0768081203

DOWNLOAD EBOOK →

The effects of inflight atmospheric icing can be devastating to aircraft. Universities and industry have been hard at work to respond to the challenge of maintaining flight safety in all weather conditions. Proposed changes in the regulations for operation in icing conditions are sure to keep this type of research and development at its highest level. This is especially true for the effects of ice crystals in the atmosphere, and for the threat associated with supercooled large drop (SLD) icing. This collection of ten SAE International technical papers brings together vital contributions to the subject. Icing on aircraft surfaces would not be a problem if a material were discovered that prevented the freezing and accretion of supercooled drops. Many options that appeared to have promising icephobic properties have had serious shortfalls in durability. This title addresses, among other topics, the measurement techniques and the drop physics that apply to icing, certification for flight through ice crystal clouds and in supercooled large drops, improvements in predictive techniques, scaling methods, test facilities and techniques, and rotorcraft icing.

The Effects of the Critical Ice Accretion on Airfoil and Wing Performance

The Effects of the Critical Ice Accretion on Airfoil and Wing Performance PDF

Author: National Aeronautics and Space Administration (NASA)

Publisher: Createspace Independent Publishing Platform

Published: 2018-07-13

Total Pages: 26

ISBN-13: 9781722863326

DOWNLOAD EBOOK →

In support of the NASA Lewis Modern Airfoils Ice Accretion Test Program, the University of Illinois at Urbana-Champaign provided expertise in airfoil design and aerodynamic analysis to determine the aerodynamic effect of ice accretion on modern airfoil sections. The effort has concentrated on establishing a design/testing methodology for "hybrid airfoils" or "sub-scale airfoils," that is, airfoils having a full-scale leading edge together with a specially designed and foreshortened aft section. The basic approach of using a full-scale leading edge with a foreshortened aft section was considered to a limited extent over 40 years ago. However, it was believed that the range of application of the method had not been fully exploited. Thus a systematic study was being undertaken to investigate and explore the range of application of the method so as to determine its overall potential. Selig, Michael S. and Bragg, Michael B. and Saeed, Farooq Glenn Research Center NCC3-408; NCC3-509...

A Wind Tunnel Study of Icing Effects on a Business Jet Airfoil

A Wind Tunnel Study of Icing Effects on a Business Jet Airfoil PDF

Author: National Aeronautics and Space Administration (NASA)

Publisher: Createspace Independent Publishing Platform

Published: 2018-06-20

Total Pages: 36

ISBN-13: 9781721570294

DOWNLOAD EBOOK →

Aerodynamic wind tunnel tests were conducted to study the effects of various ice accretions on the aerodynamic performance of a 36-inch chord, two-dimensional business jet airfoil. Eight different ice shape configurations were tested. Four were castings made from molds of ice shapes accreted in an icing wind tunnel. Two were made using computationally smoothed tracings of two of the ice shapes accreted in the icing tunnel. These smoothed profiles were then extended in the spanwise direction to form a two-dimensional ice shape. The final two configurations were formed by applying grit to the smoothed ice shapes. The ice shapes resulted in as much as 48% reduction in maximum lift coefficient from that of the clean airfoil. Large increases in drag and changes in pitching moment were also observed. The castings and their corresponding smoothed counterparts yielded similar results. Little change in performance was observed with the addition of grit to the smoothed ice shapes. Changes in the Reynolds number (from 3 x 10(exp 6) to 10.5 x 10(exp 6) and Mach number (from 0.12 to 0.28) did not significantly affect the iced-airfoil performance coefficients. Addy, Harold E., Jr. and Broeren, Andy P. and Zoeckler, Joesph G. and Lee, Sam Glenn Research Center NASA/TM-2003-212124, NAS 1.15:212124, E-13776, AIAA Paper 2003-0727

Ice Accretions and Icing Effects for Modern Airfoils

Ice Accretions and Icing Effects for Modern Airfoils PDF

Author: Harold E. Addy

Publisher:

Published: 2000

Total Pages: 292

ISBN-13:

DOWNLOAD EBOOK →

Icing tests were conducted to document ice shapes formed on three different two-dimensional airfoils and to study the effects of the accreted ice on aerodynamic performance. The models tested were representative of airfoil designs in current use for each of the commercial transport, business jet, and general aviation categories of aircraft. The models were subjected to a range of icing conditions in an icing wind tunnel. The conditions were selected primarily from the Federal Aviation Administration's Federal Aviation Regulations 25 Appendix C atmospheric icing conditions. A few large droplet icing conditions were included. To verify the aerodynamic performance measurements, molds were made of selected ice shapes formed in the icing tunnel. Castings of the ice were made from the molds and placed on a model in a dry, low-turbulence wind tunnel where precision aerodynamic performance measurements were made. Documentation of all the ice shapes and the aerodynamic performance measurements made during the icing tunnel tests is included in this report. Results from the dry, low-turbulence wind tunnel tests are also presented.

Ice Accretion and Icing Technology

Ice Accretion and Icing Technology PDF

Author: Robert J Flemming

Publisher: SAE International

Published: 2015-04-16

Total Pages: 122

ISBN-13: 0768081890

DOWNLOAD EBOOK →

The effects of inflight atmospheric icing can be devastating to aircraft. Universities and industry have been hard at work to respond to the challenge of maintaining flight safety in all weather conditions. Proposed changes in the regulations for operation in icing conditions are sure to keep this type of research and development at its highest level. This is especially true for the effects of ice crystals in the atmosphere, and for the threat associated with supercooled large drop (SLD) icing. This collection of ten SAE International technical papers brings together vital contributions to the subject. Icing on aircraft surfaces would not be a problem if a material were discovered that prevented the freezing and accretion of supercooled drops. Many options that appeared to have promising icephobic properties have had serious shortfalls in durability. This title addresses, among other topics, the measurement techniques and the drop physics that apply to icing, certification for flight through ice crystal clouds and in supercooled large drops, improvements in predictive techniques, scaling methods, test facilities and techniques, and rotorcraft icing.

Lanterna Rally - Theme by Grace Themes