-PDF Download- Geotechnical Engineering Applied Soil Mechanics And Foundation Engineering Volume 4 EBOOK

Geotechnical Engineering - Applied Soil Mechanics and Foundation Engineering - Volume 4

Author: Cyrus Aryani

Publisher:

Published: 2020

Total Pages:

ISBN-13: 9781734264241

The five-volume book series delivers a comprehensive coverage of topics in geotechnical engineering practice. The unique design of the text allows the user to look up a topic of interest and be able to find, in most cases, the related information all on the same sheet with related figures and tables, eliminating the need for figure and table referral numbers. In a way, each page is a capsule of information on its own, yet, related to the subject covered in that chapter. The topics covered in all five volumes will assist the reader with becoming a licensed professional engineer (PE) and a licensed geotechnical engineer (GE). Volume 4 contains chapters 18 through 28 with ground modification focus. The most common methods of soil improvement are presented in a practical way covering applications, construction methods, design considerations, advantages/disadvantages of each technique, and specification guidelines. Included are: Dynamic Deep Compaction, Deep Vibro Techniques, Aggregate Piers, Grouting (slurry, chemical, compaction, jet, and soil fracture), Deep Soil Mixing, Prefabricated Vertical Drains, and Slurry Walls. Also, brief descriptions of dynamic replacement, rapid impact compaction, vibratory probes, blast densification, vibro concrete columns, controlled modulus columns, micropiles, mass mixing, ground freezing, heat treatment, vacuum consolidation, electro-treatment, and bio-treatment are provided. In addition, chapter 27 covers In-situ Soil Testing methods, including: Standard Penetration Test (SPT), Cone Penetration Test (CPT), Vane Shear Test (VST), and Dilatometer Test (DMT). Chapter 28 presents practical methods for Soil Liquefaction analysis.

Geotechnical Engineering - Applied Soil Mechanics and Foundation Engineering - Volume 1

Author: Cyrus Aryani

Publisher:

Published: 2020

Total Pages:

ISBN-13: 9781734264210

DOWNLOAD EBOOK →

Soils are the most common and complex type of construction material. Virtually all structures are either built with soil (e.g., earth dams and embankments), in soil (e.g., tunnels and underground storage facilities), or on soil (e.g., building foundations and roads). Soil conditions and load combinations are unique to each site. To be able to predict soil behavior under the anticipated loading conditions, the mechanics of soils should be well understood, and their specific properties evaluated. The project design should also take into consideration the environmental, social, and economic factors. The five-volume book series delivers a comprehensive coverage of topics in geotechnical engineering practice. The unique design of the text allows the user to look up a topic of interest and be able to find, in most cases, the related information all on the same sheet with related figures and tables, eliminating the need for figure and table referral numbers. In a way, each page is a capsule of information on its own, yet, related to the subject covered in that chapter. The topics covered in all five volumes will assist the reader with becoming a licensed professional engineer (PE) and a licensed geotechnical engineer (GE). Volume 1 contains chapters 1 through 7, which provides the user with a practical guide on the fundamentals of soil mechanics, including: Natural Soil Deposits, Soil Composition and Properties, Soil Improvement, Soil Water, Soil Stresses, Soil Compressibility and Settlement, and Shear Strength of Soil. Example problems follow the topic they cover. Several practice problems are included at the end of each chapter with the answers provided. It also contains the necessary forms, tables, and graphing papers for the state-of-the-practice laboratory experiments in soil mechanics.

Geotechnical Engineering - Applied Soil Mechanics and Foundation Engineering - Volume 3

Author: Cyrus Aryani

Publisher:

Published: 2020

Total Pages:

ISBN-13: 9781734264234

DOWNLOAD EBOOK →

The five-volume book series delivers a comprehensive coverage of topics in geotechnical engineering practice. The unique design of the text allows the user to look up a topic of interest and be able to find, in most cases, the related information all on the same sheet with related figures and tables, eliminating the need for figure and table referral numbers. In a way, each page is a capsule of information on its own, yet, related to the subject covered in that chapter. The topics covered in all five volumes will assist the reader with becoming a licensed professional engineer (PE) and a licensed geotechnical engineer (GE). Volume 3 contains chapters 12 through 17 on analysis and design of unconventional retaining structures. Each chapter is a stand-alone design module covering a major type of retaining structure, including: Anchored Bulkheads (free and modified free earth support methods, fixed and simplified fixed earth support methods, design of anchorage system, ...), Cellular Cofferdams (cell configurations, design methods for rock, granular, and cohesive sites, ...), Soil Nail Walls (construction methods, nail load support, design approach, corrosion protection, drilling and grouting, wall drainage and facing, nail testing, wall monitoring, ...), Tieback Walls (construction methods, anchor capacity, design approach, corrosion protection, wall drainage, anchor testing, wall monitoring, ...), Mechanically Stabilized Earth (MSE) Walls (design approach for external and internal stability, select backfill, drainage requirements, ...), and Geosynthetic Reinforced Segmental Retaining Walls (design approach for external and internal stability, soil-reinforcement interaction, design details, a comprehensive wall design, ...). Each chapter is prepared to provide the reader with fundamental aspects of design methodology in a concise and practical way. Numerous illustrations are provided for better visualization and grasp of the design concepts.

Geotechnical Engineering - Applied Soil Mechanics and Foundation Engineering - Volume 2

Author: Cyrus Aryani

Publisher:

Published: 2020

Total Pages:

ISBN-13: 9781734264227

DOWNLOAD EBOOK →

The five-volume book series delivers a comprehensive coverage of topics in geotechnical engineering practice. The unique design of the text allows the user to look up a topic of interest and be able to find, in most cases, the related information all on the same sheet with related figures and tables, eliminating the need for figure and table referral numbers. In a way, each page is a capsule of information on its own, yet, related to the subject covered in that chapter. The topics covered in all five volumes will assist the reader with becoming a licensed professional engineer (PE) and a licensed geotechnical engineer (GE). Volume 2 contains chapters 8 through 11, which provides the user with a practical guide on the fundamentals of soil mechanics and foundation engineering, including: Lateral Earth Pressures (at-rest case, active case, passive case, Rankine's and Coulomb's methods, Culmann's graphical method, different site and surface loading conditions, ...) and Retaining Structures (different types of retaining walls and braced cuts, stability analysis, backfill and subdrain systems, ...), Stability of Slopes (natural and man-made slopes, modes of failure, methods of analysis, landslide stabilization methods, hillside grading and land development, erosion control, ...), Shallow Foundations (types of shallow foundations, methods of bearing capacity evaluation for a variety of site, groundwater, and loading conditions, settlement analysis, ...), and Deep Foundations (installation of piles, construction of drilled shafts, load capacity of piles and drilled shafts, static and dynamic testing, integrity testing of piles, cross-hole sonic logging and thermal integrity profiling for drilled shafts, ...). Example problems follow the topic they cover. Several practice problems are included at the end of each chapter with the answers provided.

Advanced Geotechnical Analyses

Author: P.K. Banerjee

Publisher: CRC Press

Published: 1991-12-16

Total Pages: 422

ISBN-13: 1482286653

DOWNLOAD EBOOK →

The chapters in this book show that a careful blend of engineering judgement and advanced principles of engineering mechanics may be used to resolve many complex geotechnical engineering problems. It is hoped that these may inspire the geotechnical engineering practice to make more extensive use of them in future.

Geotechnical Engineering - Applied Soil Mechanics and Foundation Engineering - Volume 5

Author: Cyrus Aryani

Publisher:

Published: 2020

Total Pages:

ISBN-13: 9781734264258

DOWNLOAD EBOOK →

The five-volume book series delivers a comprehensive coverage of topics in geotechnical engineering practice. The unique design of the text allows the user to look up a topic of interest and be able to find, in most cases, the related information all on the same sheet with related figures and tables, eliminating the need for figure and table referral numbers. In a way, each page is a capsule of information on its own, yet, related to the subject covered in that chapter. The topics covered in all five volumes will assist the reader with becoming a licensed professional engineer (PE) and a licensed geotechnical engineer (GE). Volume 5 contains chapters 29 through 36 with the focus on geosynthetics applications in geotechnical engineering. Chapter 29 presents an Overview of Geosynthetics with their polymer formulations and manufacturing methods. Subsequent chapters include: Geotextiles, Geogrids, Geonets, Geomembranes, Geosynthetic Clay Liners, Geofoam, and Geocomposites. Each chapter covers the geosynthetic materials with regard to their functions and applications, testing methods to evaluate their engineering properties, and methods of analysis and design. The text is prepared in a practical and easy to follow format with the focus on the state-of-the-practice in geotechnical engineering with the added component of geosynthetics applications. Example problems follow the topic they cover and several practice problems are included at the end of each chapter.

Soil Mechanics and Foundation Engineering: Fundamentals and Applications

Author: Nagaratnam Sivakugan

Publisher: McGraw Hill Professional

Published: 2021-07-16

Total Pages: 638

ISBN-13: 1260468496

DOWNLOAD EBOOK →

Learn the basics of soil mechanics and foundation engineering This hands-on guide shows, step by step, how soil mechanics principles can be applied to solve geotechnical and foundation engineering problems. Presented in a straightforward, engaging style by an experienced PE, Soil Mechanics and Foundation Engineering: Fundamentals and Applications starts with the basics, assuming no prior knowledge, and gradually proceeds to more advanced topics. You will get rich illustrations, worked-out examples, and real-world case studies that help you absorb the critical points in a short time. Coverage includes: Phase relations Soil classification Compaction Effective stresses Permeability and seepage Vertical stresses under loaded areas Consolidation Shear strength Lateral earth pressures Site investigation Shallow and deep foundations Earth retaining structures Slope stability Reliability-based design

Geotechnical Engineering

Author: V.N.S. Murthy

Publisher: CRC Press

Published: 2002-10-25

Total Pages: 1054

ISBN-13: 1482275856

DOWNLOAD EBOOK →

A must have reference for any engineer involved with foundations, piers, and retaining walls, this remarkably comprehensive volume illustrates soil characteristic concepts with examples that detail a wealth of practical considerations, It covers the latest developments in the design of drilled pier foundations and mechanically stabilized earth reta

Geotechnical Engineering

Author: C Venkatramaiah

Publisher: New Age International

Published: 1995

Total Pages: 1078

ISBN-13: 9788122408294

DOWNLOAD EBOOK →

Geotechnical Engineering

Author: T G Sitharam

Publisher: S. Chand Publishing

Published: 2008-01-01

Total Pages: 289

ISBN-13: 812192457X

DOWNLOAD EBOOK →

In this book,a chapter on stability of slopes has been included as most of the universities cover this in the first course of Geotechnical Engineering.The contents of this volume are written at a basic level suitable for a first course inGeotechnical Engineering.This book highlights the basic principles of soil mechnics along with applications to many problems in Geotechnical Engineering.The material is covered in a very simple,clear and logical manner.A number of solved and exercise problems have been included in each chapter.