Detection of Abandoned Underground Coal Mines by Geophysical Methods

Detection of Abandoned Underground Coal Mines by Geophysical Methods PDF

Author: HRB-Singer, Inc. Environmental Sciences Branch

Publisher:

Published: 1972

Total Pages: 114

ISBN-13:

DOWNLOAD EBOOK →

Acid drainage produced by abandoned coal mines continues to cause serious water pollution problems. Without knowing the exact location of the concealed openings and the extent of the mine, source abatement techniques are virtually impossible. Drilling is the only known method for accurately determining the location and extent of the mine voids, but this is extremely expensive. This project attacks the problem through field studies of the following geophysical methods: electrical resistivity, self-potential, infrared radiometry, total field and differential magnetometry, seismic refraction and reflection, very low frequency electromagnetic and induced polarization over well-documented, drift, coal mines. Airborne infrared radiometry proved to be an excellent tool for detecting and mapping acid mine/fresh water sources, acid mine/fresh water drainage, and fracture traces under selected conditions.

Developments in Ground Control in Mining 1981-2020

Developments in Ground Control in Mining 1981-2020 PDF

Author: Syd S. Peng

Publisher: Society for Mining, Metallurgy & Exploration

Published: 2022-06-03

Total Pages: 434

ISBN-13: 0873354990

DOWNLOAD EBOOK →

The best of ground control technology, 40 years in the making. Developments in Ground Control summarizes the objectives, methodology used, and major conclusions reached from papers presented and published in the International Conference on Ground Control in Mining (ICGCM) proceedings from 1981 to 2020. Because the subject areas of the papers published in the proceedings are so broad, ranging from accident training and coal/rock bursts to geology, pillar, multiseam mining, in situ stresses, roof falls, and roof supports to surface subsidence, the papers were grouped into 13 aggregate topics and addressed separately in 13 book chapters by 13 authors from 4 countries. These book chapters are a fresh look at the topics, providing new insights, sourcing older papers, and summarizing data. This is an enormous help for those seeking information on ground control. There were 1,795 papers in the 40 years of ICGCM proceedings in more than 40 ground control topical areas. It would certainly be very time consuming if not impossible to find the right papers of interest in a timely manner. This book makes it easy for interested people to find the progress, application, and achievements of certain techniques from the past 40 years and how they affected the field of ground control and the world mining industry, in particular, the United States. Generally speaking, most researchers tend to favor recent developments when performing a literature search, ignoring or considering old papers outdated. In contrast, over the last 40 years, most research findings for a specific topic in ICGCM received continuing attention for subsequent development or repeated citations if applications were successful.

Sensing and Monitoring Technologies for Mines and Hazardous Areas

Sensing and Monitoring Technologies for Mines and Hazardous Areas PDF

Author: Swadesh Chaulya

Publisher: Elsevier

Published: 2016-06-10

Total Pages: 434

ISBN-13: 0128031956

DOWNLOAD EBOOK →

Sensing and Monitoring Technologies for Mines and Hazardous Areas: Monitoring and Prediction Technologies presents the fundamentals of mining related geotechnical risk and how the latest advances in sensing and data communication can be used both to prevent accidents and provide early warnings. Opencast mining operations involve huge quantities of overburden removal, dumping, and backfilling in excavated areas. Substantial increases in the rate of accumulation of waste dumps in recent years has resulted in greater height of dumps and also has given rise to the danger of dump failures as steeper open pit slopes are prone to failure. These failures lead to loss of valuable human lives and damage to mining machinery. This book presents the most recent advances in gas sensors, methane detectors, and power cut-off systems. It also introduces monitoring of the gas strata and environment, and an overview of the use of Internet of Things and cloud computing for mining sensing and surveillance purposes. Targeted at geotechnical and mining engineers, this volume covers the latest findings and technology to prevent mining accidents and mitigate the inherent risk of the activity. Presents complete details of a real-time slope stability monitoring system using wireless sensor networking and prediction technique based on multivariate statistical analysis of various parameters and analytical hierarchy process methods Discusses innovative ideas and new concepts of sensing technologies, mine transport surveillance, digital mining, and cloud computing to improve safety and productivity in mining industry Includes slope stability prediction software, downloadable through a companion website, which can be used for monitoring, analyzing, and storing different sensors and providing audio-visual, SMS, and email alerts Covers the latest findings and technology to prevent mining accidents and mitigate the inherent risk

The Second Half Century of Rock Mechanics, Three Volume Set

The Second Half Century of Rock Mechanics, Three Volume Set PDF

Author: Luis Ribeiro e Sousa

Publisher: CRC Press

Published: 2007-08-05

Total Pages: 1554

ISBN-13: 1000006778

DOWNLOAD EBOOK →

Forty one years ago, the International Society for Rock Mechanics (ISRM) held its 1st International Congress in Lisbon, Portugal. In July 2007, the 11th ISRM Congress returned to Lisbon, where the Portuguese Geotechnical Society (SPG), the Portuguese National Group of the ISRM, hosted the meeting. The Second Half Century of Rock Mechanics comprises

Rock Stress and Earthquakes

Rock Stress and Earthquakes PDF

Author: Furen Xie

Publisher: CRC Press

Published: 2010-07-29

Total Pages: 892

ISBN-13: 9781136861147

DOWNLOAD EBOOK →

The evaluation of in-situ rock stress is not only important in the exploration and engineering involving rock masses for mining, hydropower, tunneling, oil and gas production, and stone quarrying, but also in the geodynamics and earthquake prediction. The methods of determining these stresses for shallow crust in the engineering practice, including hydraulic fracture method, stress relief method, and acoustic emission method, have not developed substantially to satisfy the increasing utilization of rock masses. The geophysical methods for stresses determination of deep crust only determine the stress fields of deep crust qualitatively. Contributed by a group of leading experts from engineering and geophysical community, Rock Stress and Earthquakes addresses new developments in numerical modeling and advanced measuring techniques in engineering practices, and build new connections between traditional and geophysical methods, which will both benefit earthquake prediction based on the concept of the crustal stresses. Rock Stress and Earthquakes reflects the developments in this area, covering measuring techniques, interpretation methods, and the application of in-situ stress in engineering practice and geophysics, and is of interest to academics and engineers in rock mechanics, geophysics, geology, and seismology.

Lanterna Rally - Theme by Grace Themes