eBook PDF Download Digital Library
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2020-05-22
Total Pages: 6
ISBN-13:
DOWNLOAD EBOOK →This Standard specifies using the hydraulic increase method to determine the bursting strength of the corrugated fiberboard. This Standard is applicable to the corrugated fiberboard with bursting strength of 350~5500kPa.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2019-11-30
Total Pages: 15
ISBN-13:
DOWNLOAD EBOOK →This Standard specifies the classification, technical requirements, inspection methods, and inspection rules of tempered glass. It applies to tempered glass for construction and tempered glass for use other than construction such as industrial equipment.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2016-04-30
Total Pages: 9
ISBN-13:
DOWNLOAD EBOOK →This Standard specifies the main content and basic requirements of marks for package of coating products. Marks for package of coating products, which are used to represent product model, name, net weight, quality grade for package, consist of texts, letters, graphics and Arabic numerals.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2015-12-04
Total Pages: 19
ISBN-13:
DOWNLOAD EBOOK →This Standard specifies the general technical delivery requirements of all steel and steel products included in GB/T 15574, except cast steel and sintered metal products.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2015-11-17
Total Pages: 21
ISBN-13:
DOWNLOAD EBOOK →This Standard specifies the requirements of the mechanical testing, sampling location and sample preparation of the section steel, steel bar, steel plate and steel tube defined in GB/T 15574. Through negotiation on both sides, this Standard may also adopt other metal products for sampling.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2015-08-02
Total Pages: 25
ISBN-13:
DOWNLOAD EBOOK →This Standard specifies two test methods, namely, manual and automatic methods, for cloud point of petroleum products, biodiesel and biodiesel fuel blend. The manual method is deemed as the arbitration method.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2018-06-02
Total Pages: 8
ISBN-13:
DOWNLOAD EBOOK →standard applies to the 180 peel strength determination for the single, double-sided pressure-sensitive adhesive tape and stainless steel plate, it is also applicable to other materials, such as PVC, ABS, PE, etc.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2018-10-19
Total Pages: 16
ISBN-13:
DOWNLOAD EBOOK →This Standard specifies a test method for assessing the resistance of paint coatings to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate. The property measured by this empirical test procedure depends, among other factors, on the adhesion of the coating to either the preceding coat or the substrate. This procedure is not to be regarded, however, as a means of measuring adhesion.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2018-09-14
Total Pages: 24
ISBN-13:
DOWNLOAD EBOOK →This Standard specifies a method of converting room temperature elongations after fracture obtained on various gauge lengths. It includes the conversion formula and the conversion factor table of the elongation, as well as the graphs for performing such conversions. This Standard is applicable to carbon and low alloy steels within the tensile strength range 300 to 700 MPa and in the hot-rolled, hot-rolled and normalized or annealed conditions, with or without tempering.
Author: https://www.chinesestandard.net
Publisher: https://www.chinesestandard.net
Published: 2018-09-14
Total Pages: 23
ISBN-13:
DOWNLOAD EBOOK →This Standard specifies a method of converting room temperature elongations after fracture obtained on various gauge lengths. It includes the conversion formula and the conversion factor table of the elongation, as well as the graphs for performing such conversions. This Standard is applicable to the test piece of austenitic stainless steels in solution treatment condition within the tensile strength range 450 to 750 MPa, with an original gauge length not exceed 25Sx, and a width to thickness ratio not exceed 20.
