-PDF Download- Gb T 3078 2019 Translated English Of Chinese Standard Gbt 3078 2019 Gb T3078 2019 Gbt3078 2019 EBOOK

GB/T 3078-2019 Translated English of Chinese Standard. (GBT 3078-2019, GB/T3078-2019, GBT3078-2019)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2019-10-12

Total Pages: 15

ISBN-13:

This Standard specifies the classification, ordering content, size, shape and allowable deviation, technical requirements, test methods, inspection rules, packaging, marking and quality certificates of structural steel cold drawing and cold drawing polish steels.

GB/T 37682-2019 Translated English of Chinese Standard. (GBT 37682-2019, GB/T37682-2019, GBT37682-2019)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2019-08-31

Total Pages: 13

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies the ordering requirements, manufacturing process, technical requirements, inspection rules and test methods, acceptance and quality certification, identification and packaging of large exposed gear steel castings. This Standard applies to the ordering, manufacture, and inspection of large gear steel castings in the form of exposed drive, which are cast using the sand mold.

GB/T 37598-2019 Translated English of Chinese Standard. (GBT 37598-2019, GB/T37598-2019, GBT37598-2019)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2019-09-14

Total Pages: 8

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies to use blue fracture test method to inspect macro nonmetallic inclusions in steel, including sample preparation, inspection method, inspection result and inspection report. This Standard is applicable to inspect macro non-metallic inclusions in steel, of which length is not less than 1mm, width is not less than 0.1mm.

GB/T 38009-2019 Translated English of Chinese Standard. (GBT 38009-2019, GB/T38009-2019, GBT38009-2019)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2021-01-10

Total Pages: 25

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies the requirement for the nickel release from the metal parts of metal and combination frames, the method of wear simulation, the measurement of nickel release, calculations, and test report. This Standard applies to those spectacle frames which, if produced with materials or surface treatments containing nickel.

GB/T 38409-2019 Translated English of Chinese Standard. (GBT 38409-2019, GB/T38409-2019, GBT38409-2019)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2021-04-17

Total Pages: 10

ISBN-13:

DOWNLOAD EBOOK →

This standard specifies the determination method of N-methyl-2-pyrrolidone (NMP) and N-ethyl-2-pyrrolidone (NEP) content in leather and its products. This standard is applicable to the determination of NMP and NEP in various leather and its products.

GB/T 709-2019 Translated English of Chinese Standard. (GBT 709-2019, GB/T709-2019, GBT709-2019)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2014-04-20

Total Pages: 22

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies terms and definitions, classification and code, dimensions, dimension tolerances, shape, measurement of dimensions and shape of hot-rolled steel plates/sheets and strips. This Standard applies to plates with a rolling width of not less than 600 mm, wide strips, slit wide strips, and plates/sheets cut from strips.

GB/T 37335-2019 Translated English of Chinese Standard. (GBT 37335-2019, GB/T37335-2019, GBT37335-2019)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2019-11-16

Total Pages: 11

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies the design bases, design contents and methods, design requirements and design check of structural full penetration weld of self-elevating drilling units. This Standard is applicable to the design of structural full penetration weld of self-elevating drilling units. The design of structural full penetration weld of other types of self-elevating units may also refer to this Standard.

GB/T 38191-2019 Translated English of Chinese Standard. (GBT 38191-2019, GB/T38191-2019, GBT38191-2019)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2020-01-20

Total Pages: 13

ISBN-13:

DOWNLOAD EBOOK →

This Standard stipulates the structural features, technical requirements and test methods of nickel alloy self-lubricated bearing material. This Standard is applicable to nickel alloy self-lubricated bearing material.

GB/T 37057-2019 Translated English of Chinese Standard. (GBT 37057-2019, GB/T37057-2019, GBT37057-2019)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2019-11-02

Total Pages: 10

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies the main control points and requirements for the production process of multi-way precision die forgings, including process design, raw materials, blanking, molds, forging equipment, forging, safety and environmental protection. This Standard applies to the quality control of multi-way precision die forgings.

GB/T 37571-2019 Translated English of Chinese Standard. (GBT 37571-2019, GB/T37571-2019, GBT37571-2019)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2019-08-31

Total Pages: 14

ISBN-13:

DOWNLOAD EBOOK →

This Standard stipulates the technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and order form (or contract) content of copper and copper alloy strip for relay. This Standard is applicable to copper and copper alloy strip for relay.