GB/T 19976-2005 Translated English of Chinese Standard. (GBT 19976-2005, GB/T19976-2005, GBT19976-2005)

GB/T 19976-2005 Translated English of Chinese Standard. (GBT 19976-2005, GB/T19976-2005, GBT19976-2005) PDF

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2016-04-18

Total Pages: 9

ISBN-13:

DOWNLOAD EBOOK →

This standard specifies the methods for the determination of the bursting strength of textile by polished steel balls, including the test piece bursting strength tests in two states of conditioning in standard atmosphere for test and soaked in the water.

GB/T 5617-2005 Translated English of Chinese Standard. (GBT 5617-2005, GB/T5617-2005, GBT5617-2005)

GB/T 5617-2005 Translated English of Chinese Standard. (GBT 5617-2005, GB/T5617-2005, GBT5617-2005) PDF

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2020-12-20

Total Pages: 8

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies the meaning and determination method of effective depth of hardening (DS) of steel parts after induction or flame hardening. This Standard is applicable to parts whose effective depth of hardening is greater than 0.3 mm after induction or flame hardening.

GB/T 19719-2005 Translated English of Chinese Standard. (GBT 19719-2005, GB/T19719-2005, GBT19719-2005)

GB/T 19719-2005 Translated English of Chinese Standard. (GBT 19719-2005, GB/T19719-2005, GBT19719-2005) PDF

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2014-10-28

Total Pages: 18

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies a method for simulating the release of nickel from jewellery, in order to determine whether the item releases nickel at a rate greater than 0.5 ug/(cm2-week). This Standard is applicable to the determination of the release of nickel from jewellery, as well as the products intended to come into direct and prolonged contact with the skin (see 4.3.2 of GB 11887-2002).

GB/T 14992-2005 Translated English of Chinese Standard. (GBT 14992-2005, GB/T14992-2005, GBT14992-2005)

GB/T 14992-2005 Translated English of Chinese Standard. (GBT 14992-2005, GB/T14992-2005, GBT14992-2005) PDF

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2019-08-03

Total Pages: 29

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies the classification, naming principles and naming procedures of designation, and general chemical composition, etc. for superalloys and high temperature intermetallic materials. This Standard applies to deformed superalloys, cast superalloys (isometric crystal cast superalloys, directionally solidified columnar crystal superalloys, and single crystal superalloys), superalloy wire for welding, powder metallurgy superalloys, dispersion strengthened superalloys and high temperature intermetallic materials.

GB/T 2577-2005 Translated English of Chinese Standard. (GBT 2577-2005, GB/T2577-2005, GBT2577-2005)

GB/T 2577-2005 Translated English of Chinese Standard. (GBT 2577-2005, GB/T2577-2005, GBT2577-2005) PDF

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2016-08-10

Total Pages: 12

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies the specimens, apparatus, reagents, test procedure and test report concerning the determination of resin content in glass fiber reinforced plastics after calcination. This Standard is applicable to glass fiber reinforced plastics of which resin matrix can be fully combusted.

GB/T 9450-2005 Translated English of Chinese Standard. (GBT 9450-2005, GB/T9450-2005, GBT9450-2005)

GB/T 9450-2005 Translated English of Chinese Standard. (GBT 9450-2005, GB/T9450-2005, GBT9450-2005) PDF

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2014-10-28

Total Pages: 10

ISBN-13:

DOWNLOAD EBOOK →

This standard specifies the meaning and determination of steel-parts carburizing and carbonitriding hardened-case depth. This standard is applicable to carburizing and carbonitriding hardened layer; and the parts that, when they are final-heat-treated, have a hardness of less than 450 HV at a distance of three times the case-hardened depth, from the surface. For steel-parts that can not meet the above conditions, it shall be determined in accordance with a special agreement. For steel-parts of which, at a distance of three times the hardened-case depth from the surface, the hardness is greater than 450 HV, this standard is still valid, provided that a limiting hardness value that is greater than 550 HV (in steps of 25HV) is selected for the case-hardened depth.

Lanterna Rally - Theme by Grace Themes