-PDF Download- Gb T 176001 1998 Translated English Of Chinese Standard Gbt 176001 1998 Gb T176001 1998 Gbt176001 1998 EBOOK

GB/T 9963-1998 Translated English of Chinese Standard. (GBT 9963-1998, GB/T9963-1998, GBT9963-1998)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2019-11-30

Total Pages: 15

ISBN-13:

This Standard specifies the classification, technical requirements, inspection methods, and inspection rules of tempered glass. It applies to tempered glass for construction and tempered glass for use other than construction such as industrial equipment.

GB/T 6546-1998 Translated English of Chinese Standard. (GBT 6546-1998, GB/T6546-1998, GBT6546-1998)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2020-06-28

Total Pages: 7

ISBN-13:

DOWNLOAD EBOOK →

This standard specifies the determination method of the edgewise crush resistance of corrugated fiberboard. This standard is applicable to the determination of the edgewise crush resistance of corrugated cardboard with single flute (three layers), double flute (five layers), triple flute (seven layers).

GB/T 17619-1998 Translated English of Chinese Standard. (GBT 17619-1998, GB/T17619-1998, GBT17619-1998)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2015-08-02

Total Pages: 25

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies two test methods, namely, manual and automatic methods, for cloud point of petroleum products, biodiesel and biodiesel fuel blend. The manual method is deemed as the arbitration method.

GB/T 17600.1-1998 Translated English of Chinese Standard. (GBT 17600.1-1998, GB/T17600.1-1998, GBT17600.1-1998)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2018-09-14

Total Pages: 24

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies a method of converting room temperature elongations after fracture obtained on various gauge lengths. It includes the conversion formula and the conversion factor table of the elongation, as well as the graphs for performing such conversions. This Standard is applicable to carbon and low alloy steels within the tensile strength range 300 to 700 MPa and in the hot-rolled, hot-rolled and normalized or annealed conditions, with or without tempering.

GB/T 9750-1998 Translated English of Chinese Standard. (GBT 9750-1998, GB/T9750-1998, GBT9750-1998)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2016-04-30

Total Pages: 9

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies the main content and basic requirements of marks for package of coating products. Marks for package of coating products, which are used to represent product model, name, net weight, quality grade for package, consist of texts, letters, graphics and Arabic numerals.

GB/T 6545-1998 Translated English of Chinese Standard. (GBT 6545-1998, GB/T6545-1998, GBT6545-1998)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2020-05-22

Total Pages: 6

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies using the hydraulic increase method to determine the bursting strength of the corrugated fiberboard. This Standard is applicable to the corrugated fiberboard with bursting strength of 350~5500kPa.

GB/T 17600.2-1998 Translated English of Chinese Standard. (GBT 17600.2-1998, GB/T17600.2-1998, GBT17600.2-1998)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2018-09-14

Total Pages: 23

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies a method of converting room temperature elongations after fracture obtained on various gauge lengths. It includes the conversion formula and the conversion factor table of the elongation, as well as the graphs for performing such conversions. This Standard is applicable to the test piece of austenitic stainless steels in solution treatment condition within the tensile strength range 450 to 750 MPa, with an original gauge length not exceed 25Sx, and a width to thickness ratio not exceed 20.

GB/T 17219-1998 Translated English of Chinese Standard. (GBT 17219-1998, GB/T17219-1998, GBT17219-1998)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2018-03-30

Total Pages: 20

ISBN-13:

DOWNLOAD EBOOK →

This standard applies to substances and products that are in direct contact with drinking water and drinking water treatment agents. These substances and products refer to the water distribution pipes, equipment and mechanical components used in drinking water supply systems (e.g., valves, chlorination dosage equipment, water treatment reagent addition device) and protective materials (such as paints, linings).

GB/T 17505-1998 Translated English of Chinese Standard. (GBT 17505-1998, GB/T17505-1998, GBT17505-1998)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2015-12-04

Total Pages: 19

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies the general technical delivery requirements of all steel and steel products included in GB/T 15574, except cast steel and sintered metal products.

GB/T 9286-1998 Translated English of Chinese Standard. (GBT 9286-1998, GB/T9286-1998, GBT9286-1998)

Author: https://www.chinesestandard.net

Publisher: https://www.chinesestandard.net

Published: 2018-10-19

Total Pages: 16

ISBN-13:

DOWNLOAD EBOOK →

This Standard specifies a test method for assessing the resistance of paint coatings to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate. The property measured by this empirical test procedure depends, among other factors, on the adhesion of the coating to either the preceding coat or the substrate. This procedure is not to be regarded, however, as a means of measuring adhesion.