Author: FIB – International Federation for Structural Concrete
Publisher: FIB - Féd. Int. du Béton
Published: 2018-08-01
Total Pages: 1312
ISBN-13: 8001064018
DOWNLOAD EBOOK →Author: Maher K. Tadros
Publisher: Transportation Research Board
Published: 2010
Total Pages: 76
ISBN-13: 0309118352
DOWNLOAD EBOOK →This report establishes a user's manual for the acceptance, repair, or rejection of precast/prestressed concrete girders with longitudinal web cracking. The report also proposes revisions to the AASHTO LRFD Bridge Design Specifications and provides recommendations to develop improved crack control reinforcement details for use in new girders. The material in this report will be of immediate interest to bridge engineers.
Author: Jens Tandler
Publisher: diplom.de
Published: 2014-04-11
Total Pages: 149
ISBN-13: 3836623331
DOWNLOAD EBOOK →Inhaltsangabe:Introduction: This dissertation is an investigation into the behaviour of externally prestressed structures, focusing on bridge box girders, at the ultimate limit state. The main objective is the ductility and the tendon stress increase up to failure of externally prestressed structures. Their behaviour will be compared to internally prestressed structures. The dissertation may have valuable information for the first stages of the design process for medium span bridges as the study is concerned about the overall safety and efficiency of prestressed concrete bridges by the means of ductility. The aim is also to provide information about the tendon stress at failure, which is required for the detailed design. Inhaltsverzeichnis:Inhaltsverzeichnis: AcknowledgementsVIII NotationIX 1.Introduction1 1.1Definitions1 1.2Significance of this study3 1.3Scope of the project5 1.4Historical overview and typical characteristics of external prestressing6 1.5Further structural applications of external prestressing9 2.Behaviour of externally prestressed structures10 2.1Tendon layout considerations10 2.2Behaviour at serviceability stage12 2.3Fatigue problems14 2.4Behaviour at ultimate limit stage14 2.4.1Influence of tendon slip on the ultimate limit state18 2.4.2Influence of the arrangement of the deviators on the behaviour at ultimate limit state19 2.4.3Influence of simply support and continuous support on the ultimate limit state20 2.4.4Precast segmental and monolithic bridges21 3.Collapse analysis23 3.1Investigated bridge types and their differences23 3.2Original bridge data28 3.3Simplified bridge data as basis for the calculations30 3.4FE Calculation32 3.4.1Technical aspects33 3.4.2General approach34 3.4.3Geometric model39 3.4.4Element specifications40 3.4.5Constitutive models45 3.4.6Ordinary reinforcement59 3.4.7Prestress60 3.4.8Material and geometric non-linearity63 3.4.9Kinematic constraints66 3.4.10Discrete crack propagation analysis of the precast segmental type with gap elements68 3.4.11Summary of the dividing features of the different structure types for the FE analysis72 4.Results73 4.1Load deflection behaviour73 4.2Tendon stress increase up to failure76 4.3Other results78 5.Discussion of the results85 5.1Interpretation of the results85 5.2Discussion of the exactness of the FE calculations by comparing to the full scale test89 5.3Comparison to other FE calculations and test results93 6.Conclusion and [...]
Author: Yu Huang
Publisher: Cambridge Scholars Publishing
Published: 2020-05-28
Total Pages: 305
ISBN-13: 152755354X
DOWNLOAD EBOOK →This book details the theory and applications of finite element (FE) modeling of post-tensioned (PT) concrete structures, and provides the updated MATLAB code (as of 2019). The challenge of modeling PT prestressed concrete structures lies in the treatment of the interface between the concrete and prestressing tendons. Using MATLAB, this study develops an innovative nonlinear FE formulation which incorporates contact techniques and engineering elements to considerably reduce the need of computational power. This FE formulation has the ability to simulate different PT frame systems with fully bonded, fully unbonded or partially bonded tendons, as well as actual sliding behavior and frictional effects in the tendons. It also allows for the accurate simulation of anchor seating loss.
Author: Nigatu Chaffo
Publisher: Cuvillier Verlag
Published: 2004
Total Pages: 169
ISBN-13: 3898739929
DOWNLOAD EBOOK →Author: M. A. Mansur
Publisher: CRC Press
Published: 1999-01-29
Total Pages: 240
ISBN-13: 9780849374357
DOWNLOAD EBOOK →This book compiles state-of-the-art information on the behavior, analysis, and design of concrete beams containing transverse openings. Discussions include the need, effects, and classification of openings as well as the general requirements for fulfilling design pure bending, combined bending, and shear - illustrated with numerical examples torsion alone or in combination with bending and shear large rectangular openings as well as opening size and location on beam behavior methods for analyzing ultimate strength and serviceability requirements effects of torsion in beams large openings in continuous beams and their effects on possible redistribution of internal forces as well as guidelines and procedures for the design of such beams effect of prestressing on the serviceability and strength of beams with web openings design against cracking at openings and ultimate loads Concrete Beams with Openings serves as an invaluable source of information for designers and practicing engineers, especially useful since little or no provision or guidelines are currently available in most building codes.
Author: Fritz Leonhardt
Publisher:
Published: 1980-01-01
Total Pages: 677
ISBN-13: 9780804445849
DOWNLOAD EBOOK →