Effect of Pneumatic De-icers and Ice Formations on Aerodynamic Characteristics of an Airfoil

Effect of Pneumatic De-icers and Ice Formations on Aerodynamic Characteristics of an Airfoil PDF

Author: Dean T. Bowden

Publisher:

Published: 1956

Total Pages: 710

ISBN-13:

DOWNLOAD EBOOK →

Measurements of lift, drag, and pitching moment of an NACA 0011 airfoil were made in icing using two types of pneumatic de-icers, one having spanwise inflatable tubes and the other having chordwise tubes. Ice remaining after inflation of the spanwise-tube de-icer increased airfoil section drag 7 to 37 percent for 0 to 4.6 degrees angle of attack over the ranges of airspeed, total air temperature, liquid-water content, and cycle times covered. This drag increase became constant after a few de-icing cycles. Drag increases due to ice remaining on the chordwise-tube de-icer were similar to those for the spanwise-tube de-icer. Minimum airfoil drag in icing (averaged over a de-icing cycle) was usually obtained with a short (about i min) de-icing cycle.

Approximations for the Thermodynamic and Transport Properties of High-temperature Air

Approximations for the Thermodynamic and Transport Properties of High-temperature Air PDF

Author: C. Frederick Hansen

Publisher:

Published: 1958

Total Pages: 724

ISBN-13:

DOWNLOAD EBOOK →

The thermodynamic and transport prorerties of high-temperature air are found in closed form starting from approximate partition functions for the major components in air and neglecting all minor components. The compressibility, energy, entropy, the specific heats, the speed of sound, the coefficients of viscosity and of thermal conductivity, and the Prandtl numbers for air are tabulated from 500 degrees to 15,000 degrees K over a range of pressure from 0.0001 to 100 atmospheres. The enthalpy of air and the mol fractions of the major components of air can easily be found from the tabulated values for compressibility and energy. It is predicted that the Prandtl number for fully ionized air will become small compared to unity, the order of 0.01, and this implies that boundary layers in such flow will be very transparent to heat flux.

Handbook of Numerical Simulation of In-Flight Icing

Handbook of Numerical Simulation of In-Flight Icing PDF

Author: Wagdi George Habashi

Publisher: Springer Nature

Published: 2024-01-12

Total Pages: 1278

ISBN-13: 3031338456

DOWNLOAD EBOOK →

This Handbook of Numerical Simulation of In-Flight Icing covers an array of methodologies and technologies on numerical simulation of in-flight icing and its applications. Comprised of contributions from internationally recognized experts from the Americas, Asia, and the EU, this authoritative, self-contained reference includes best practices and specification data spanning the gamut of simulation tools available internationally that can be used to speed up the certification of aircraft and make them safer to fly into known icing. The collection features nine sections concentrating on aircraft, rotorcraft, jet engines, UAVs; ice protection systems, including hot-air, electrothermal, and others; sensors and probes, CFD in the aid of testing, flight simulators, and certification process acceleration methods. Incorporating perspectives from academia, commercial, government R&D, the book is ideal for a range of engineers and scientists concerned with in-flight icing applications.

Lanterna Rally - Theme by Grace Themes