-PDF Download- Distributed Moving Base Driving Simulators EBOOK

Distributed Moving Base Driving Simulators

Author: Anders Andersson

Publisher: Linköping University Electronic Press

Published: 2019-04-30

Total Pages: 42

ISBN-13: 9176850900

Development of new functionality and smart systems for different types of vehicles is accelerating with the advent of new emerging technologies such as connected and autonomous vehicles. To ensure that these new systems and functions work as intended, flexible and credible evaluation tools are necessary. One example of this type of tool is a driving simulator, which can be used for testing new and existing vehicle concepts and driver support systems. When a driver in a driving simulator operates it in the same way as they would in actual traffic, you get a realistic evaluation of what you want to investigate. Two advantages of a driving simulator are (1.) that you can repeat the same situation several times over a short period of time, and (2.) you can study driver reactions during dangerous situations that could result in serious injuries if they occurred in the real world. An important component of a driving simulator is the vehicle model, i.e., the model that describes how the vehicle reacts to its surroundings and driver inputs. To increase the simulator realism or the computational performance, it is possible to divide the vehicle model into subsystems that run on different computers that are connected in a network. A subsystem can also be replaced with hardware using so-called hardware-in-the-loop simulation, and can then be connected to the rest of the vehicle model using a specified interface. The technique of dividing a model into smaller subsystems running on separate nodes that communicate through a network is called distributed simulation. This thesis investigates if and how a distributed simulator design might facilitate the maintenance and new development required for a driving simulator to be able to keep up with the increasing pace of vehicle development. For this purpose, three different distributed simulator solutions have been designed, built, and analyzed with the aim of constructing distributed simulators, including external hardware, where the simulation achieves the same degree of realism as with a traditional driving simulator. One of these simulator solutions has been used to create a parameterized powertrain model that can be configured to represent any of a number of different vehicles. Furthermore, the driver's driving task is combined with the powertrain model to monitor deviations. After the powertrain model was created, subsystems from a simulator solution and the powertrain model have been transferred to a Modelica environment. The goal is to create a framework for requirement testing that guarantees sufficient realism, also for a distributed driving simulation. The results show that the distributed simulators we have developed work well overall with satisfactory performance. It is important to manage the vehicle model and how it is connected to a distributed system. In the distributed driveline simulator setup, the network delays were so small that they could be ignored, i.e., they did not affect the driving experience. However, if one gradually increases the delays, a driver in the distributed simulator will change his/her behavior. The impact of communication latency on a distributed simulator also depends on the simulator application, where different usages of the simulator, i.e., different simulator studies, will have different demands. We believe that many simulator studies could be performed using a distributed setup. One issue is how modifications to the system affect the vehicle model and the desired behavior. This leads to the need for methodology for managing model requirements. In order to detect model deviations in the simulator environment, a monitoring aid has been implemented to help notify test managers when a model behaves strangely or is driven outside of its validated region. Since the availability of distributed laboratory equipment can be limited, the possibility of using Modelica (which is an equation-based and object-oriented programming language) for simulating subsystems is also examined. Implementation of the model in Modelica has also been extended with requirements management, and in this work a framework is proposed for automatically evaluating the model in a tool.

Extensions for Distributed Moving Base Driving Simulators

Author: Anders Andersson

Publisher: Linköping University Electronic Press

Published: 2017-03-30

Total Pages: 18

ISBN-13: 9176855244

DOWNLOAD EBOOK →

Modern vehicles are complex systems. Different design stages for such a complex system include evaluation using models and submodels, hardware-in-the-loop systems and complete vehicles. Once a vehicle is delivered to the market evaluation continues by the public. One kind of tool that can be used during many stages of a vehicle lifecycle is driving simulators. The use of driving simulators with a human driver is commonly focused on driver behavior. In a high fidelity moving base driving simulator it is possible to provide realistic and repetitive driving situations using distinctive features such as: physical modelling of driven vehicle, a moving base, a physical cabin interface and an audio and visual representation of the driving environment. A desired but difficult goal to achieve using a moving base driving simulator is to have behavioral validity. In other words, A driver in a moving base driving simulator should have the same driving behavior as he or she would have during the same driving task in a real vehicle.". In this thesis the focus is on high fidelity moving base driving simulators. The main target is to improve the behavior validity or to maintain behavior validity while adding complexity to the simulator. One main assumption in this thesis is that systems closer to the final product provide better accuracy and are perceived better if properly integrated. Thus, the approach in this thesis is to try to ease incorporation of such systems using combinations of the methods hardware-in-the-loop and distributed simulation. Hardware-in-the-loop is a method where hardware is interfaced into a software controlled environment/simulation. Distributed simulation is a method where parts of a simulation at physically different locations are connected together. For some simulator laboratories distributed simulation is the only feasible option since some hardware cannot be moved in an easy way. Results presented in this thesis show that a complete vehicle or hardware-in-the-loop test laboratory can successfully be connected to a moving base driving simulator. Further, it is demonstrated that using a framework for distributed simulation eases communication and integration due to standardized interfaces. One identified potential problem is complexity in interface wrappers when integrating hardware-in-the-loop in a distributed simulation framework. From this aspect, it is important to consider the model design and the intersections between software and hardware models. Another important issue discussed is the increased delay in overhead time when using a framework for distributed simulation.

Parameterized Verification of Synchronized Concurrent Programs

Author: Zeinab Ganjei

Publisher: Linköping University Electronic Press

Published: 2021-03-19

Total Pages: 192

ISBN-13: 9179296971

DOWNLOAD EBOOK →

There is currently an increasing demand for concurrent programs. Checking the correctness of concurrent programs is a complex task due to the interleavings of processes. Sometimes, violation of the correctness properties in such systems causes human or resource losses; therefore, it is crucial to check the correctness of such systems. Two main approaches to software analysis are testing and formal verification. Testing can help discover many bugs at a low cost. However, it cannot prove the correctness of a program. Formal verification, on the other hand, is the approach for proving program correctness. Model checking is a formal verification technique that is suitable for concurrent programs. It aims to automatically establish the correctness (expressed in terms of temporal properties) of a program through an exhaustive search of the behavior of the system. Model checking was initially introduced for the purpose of verifying finite‐state concurrent programs, and extending it to infinite‐state systems is an active research area. In this thesis, we focus on the formal verification of parameterized systems. That is, systems in which the number of executing processes is not bounded a priori. We provide fully-automatic and parameterized model checking techniques for establishing the correctness of safety properties for certain classes of concurrent programs. We provide an open‐source prototype for every technique and present our experimental results on several benchmarks. First, we address the problem of automatically checking safety properties for bounded as well as parameterized phaser programs. Phaser programs are concurrent programs that make use of the complex synchronization construct of Habanero Java phasers. For the bounded case, we establish the decidability of checking the violation of program assertions and the undecidability of checking deadlock‐freedom. For the parameterized case, we study different formulations of the verification problem and propose an exact procedure that is guaranteed to terminate for some reachability problems even in the presence of unbounded phases and arbitrarily many spawned processes. Second, we propose an approach for automatic verification of parameterized concurrent programs in which shared variables are manipulated by atomic transitions to count and synchronize the spawned processes. For this purpose, we introduce counting predicates that related counters that refer to the number of processes satisfying some given properties to the variables that are directly manipulated by the concurrent processes. We then combine existing works on the counter, predicate, and constrained monotonic abstraction and build a nested counterexample‐based refinement scheme to establish correctness. Third, we introduce Lazy Constrained Monotonic Abstraction for more efficient exploration of well‐structured abstractions of infinite‐state non‐monotonic systems. We propose several heuristics and assess the efficiency of the proposed technique by extensive experiments using our open‐source prototype. Lastly, we propose a sound but (in general) incomplete procedure for automatic verification of safety properties for a class of fault‐tolerant distributed protocols described in the Heard‐Of (HO for short) model. The HO model is a popular model for describing distributed protocols. We propose a verification procedure that is guaranteed to terminate even for unbounded number of the processes that execute the distributed protocol.

Beyond Recognition

Author: Le Minh-Ha

Publisher: Linköping University Electronic Press

Published: 2024-05-06

Total Pages: 103

ISBN-13: 918075676X

DOWNLOAD EBOOK →

This thesis addresses the need to balance the use of facial recognition systems with the need to protect personal privacy in machine learning and biometric identification. As advances in deep learning accelerate their evolution, facial recognition systems enhance security capabilities, but also risk invading personal privacy. Our research identifies and addresses critical vulnerabilities inherent in facial recognition systems, and proposes innovative privacy-enhancing technologies that anonymize facial data while maintaining its utility for legitimate applications. Our investigation centers on the development of methodologies and frameworks that achieve k-anonymity in facial datasets; leverage identity disentanglement to facilitate anonymization; exploit the vulnerabilities of facial recognition systems to underscore their limitations; and implement practical defenses against unauthorized recognition systems. We introduce novel contributions such as AnonFACES, StyleID, IdDecoder, StyleAdv, and DiffPrivate, each designed to protect facial privacy through advanced adversarial machine learning techniques and generative models. These solutions not only demonstrate the feasibility of protecting facial privacy in an increasingly surveilled world, but also highlight the ongoing need for robust countermeasures against the ever-evolving capabilities of facial recognition technology. Continuous innovation in privacy-enhancing technologies is required to safeguard individuals from the pervasive reach of digital surveillance and protect their fundamental right to privacy. By providing open-source, publicly available tools, and frameworks, this thesis contributes to the collective effort to ensure that advancements in facial recognition serve the public good without compromising individual rights. Our multi-disciplinary approach bridges the gap between biometric systems, adversarial machine learning, and generative modeling to pave the way for future research in the domain and support AI innovation where technological advancement and privacy are balanced.

Robust Stream Reasoning Under Uncertainty

Author: Daniel de Leng

Publisher: Linköping University Electronic Press

Published: 2019-11-08

Total Pages: 234

ISBN-13: 9176850137

DOWNLOAD EBOOK →

Vast amounts of data are continually being generated by a wide variety of data producers. This data ranges from quantitative sensor observations produced by robot systems to complex unstructured human-generated texts on social media. With data being so abundant, the ability to make sense of these streams of data through reasoning is of great importance. Reasoning over streams is particularly relevant for autonomous robotic systems that operate in physical environments. They commonly observe this environment through incremental observations, gradually refining information about their surroundings. This makes robust management of streaming data and their refinement an important problem. Many contemporary approaches to stream reasoning focus on the issue of querying data streams in order to generate higher-level information by relying on well-known database approaches. Other approaches apply logic-based reasoning techniques, which rarely consider the provenance of their symbolic interpretations. In this work, we integrate techniques for logic-based stream reasoning with the adaptive generation of the state streams needed to do the reasoning over. This combination deals with both the challenge of reasoning over uncertain streaming data and the problem of robustly managing streaming data and their refinement. The main contributions of this work are (1) a logic-based temporal reasoning technique based on path checking under uncertainty that combines temporal reasoning with qualitative spatial reasoning; (2) an adaptive reconfiguration procedure for generating and maintaining a data stream required to perform spatio-temporal stream reasoning over; and (3) integration of these two techniques into a stream reasoning framework. The proposed spatio-temporal stream reasoning technique is able to reason with intertemporal spatial relations by leveraging landmarks. Adaptive state stream generation allows the framework to adapt to situations in which the set of available streaming resources changes. Management of streaming resources is formalised in the DyKnow model, which introduces a configuration life-cycle to adaptively generate state streams. The DyKnow-ROS stream reasoning framework is a concrete realisation of this model that extends the Robot Operating System (ROS). DyKnow-ROS has been deployed on the SoftBank Robotics NAO platform to demonstrate the system's capabilities in a case study on run-time adaptive reconfiguration. The results show that the proposed system - by combining reasoning over and reasoning about streams - can robustly perform stream reasoning, even when the availability of streaming resources changes.

Designing for Resilience

Author: Vanessa Rodrigues

Publisher: Linköping University Electronic Press

Published: 2020-05-05

Total Pages: 137

ISBN-13: 9179298672

DOWNLOAD EBOOK →

Services are prone to change in the form of expected and unexpected variations and disruptions, more so given the increasing interconnectedness and complexity of service systems today. These changes require service systems to be resilient and designed to adapt, to ensure that services continue to work smoothly. This thesis problematises the prevailing view and assumptions underpinning the current understanding of resilience in services. Drawing on literature from service management, service design, systems thinking and social-ecological resilience theory, this work investigates how service design can foster resilience in service systems. Supported by empirical input from three research projects in healthcare, the findings show service design can contribute to the adaptability and transformability of service systems through its holistic, human-centred, participatory and experimental approaches. Through the analysis, this research identifies key intervention points for cultivating service systems resilience through service design, including the design of service interactions, processes, enabling structures and multi-level governance. The study makes two important contributions. First, it extends the understanding of service systems resilience as the collective capacity for intentional action in responding to ongoing change, coordinated across scales in order to create value. This is supported by offering alternative assumptions about resilience in service. Second, it positions service design as an enabler of service resilience by explicitly linking design practice(s) to processes that contribute to resilience. By extending the understanding of service systems resilience, this thesis lays the groundwork for future research at the intersection of service design, systemic change and resilience.

Applications of Partial Polymorphisms in (Fine-Grained) Complexity of Constraint Satisfaction Problems

Author: Biman Roy

Publisher: Linköping University Electronic Press

Published: 2020-03-23

Total Pages: 57

ISBN-13: 9179298982

DOWNLOAD EBOOK →

In this thesis we study the worst-case complexity ofconstraint satisfaction problems and some of its variants. We use methods from universal algebra: in particular, algebras of total functions and partial functions that are respectively known as clones and strong partial clones. The constraint satisfactionproblem parameterized by a set of relations ? (CSP(?)) is the following problem: given a set of variables restricted by a set of constraints based on the relations ?, is there an assignment to thevariables that satisfies all constraints? We refer to the set ? as aconstraint language. The inverse CSPproblem over ? (Inv-CSP(?)) asks the opposite: given a relation R, does there exist a CSP(?) instance with R as its set of models? When ? is a Boolean language, then we use the term SAT(?) instead of CSP(?) and Inv-SAT(?) instead of Inv-CSP(?). Fine-grained complexity is an approach in which we zoom inside a complexity class and classify theproblems in it based on their worst-case time complexities. We start by investigating the fine-grained complexity of NP-complete CSP(?) problems. An NP-complete CSP(?) problem is said to be easier than an NP-complete CSP(?) problem if the worst-case time complexity of CSP(?) is not higher thanthe worst-case time complexity of CSP(?). We first analyze the NP-complete SAT problems that are easier than monotone 1-in-3-SAT (which can be represented by SAT(R) for a certain relation R), and find out that there exists a continuum of such problems. For this, we use the connection between constraint languages and strong partial clones and exploit the fact that CSP(?) is easier than CSP(?) when the strong partial clone corresponding to ? contains the strong partial clone of ?. An NP-complete CSP(?) problem is said to be the easiest with respect to a variable domain D if it is easier than any other NP-complete CSP(?) problem of that domain. We show that for every finite domain there exists an easiest NP-complete problem for the ultraconservative CSP(?) problems. An ultraconservative CSP(?) is a special class of CSP problems where the constraint language containsall unary relations. We additionally show that no NP-complete CSP(?) problem can be solved insub-exponential time (i.e. in2^o(n) time where n is the number of variables) given that theexponentialtime hypothesisis true. Moving to classical complexity, we show that for any Boolean constraint language ?, Inv-SAT(?) is either in P or it is coNP-complete. This is a generalization of an earlier dichotomy result, which was only known to be true for ultraconservative constraint languages. We show that Inv-SAT(?) is coNP-complete if and only if the clone corresponding to ? contains essentially unary functions only. For arbitrary finite domains our results are not conclusive, but we manage to prove that theinversek-coloring problem is coNP-complete for each k>2. We exploit weak bases to prove many of theseresults. A weak base of a clone C is a constraint language that corresponds to the largest strong partia clone that contains C. It is known that for many decision problems X(?) that are parameterized bya constraint language ?(such as Inv-SAT), there are strong connections between the complexity of X(?) and weak bases. This fact can be exploited to achieve general complexity results. The Boolean domain is well-suited for this approach since we have a fairly good understanding of Boolean weak bases. In the final result of this thesis, we investigate the relationships between the weak bases in the Boolean domain based on their strong partial clones and completely classify them according to the setinclusion. To avoid a tedious case analysis, we introduce a technique that allows us to discard a largenumber of cases from further investigation.

Companion Robots for Older Adults

Author: Sofia Thunberg

Publisher: Linköping University Electronic Press

Published: 2024-05-06

Total Pages: 175

ISBN-13: 9180755747

DOWNLOAD EBOOK →

This thesis explores, through a mixed-methods approach, what happens when companion robots are deployed in care homes for older adults by looking at different perspectives from key stakeholders. Nine studies are presented with decision makers in municipalities, care staff and older adults, as participants, and the studies have primarily been carried out in the field in care homes and activity centres, where both qualitative (e.g., observations and workshops) and quantitative data (surveys) have been collected. The thesis shows that companion robots seem to be here to stay and that they can contribute to a higher quality of life for some older adults. It further presents some challenges with a certain discrepancy between what decision makers want and what staff might be able to facilitate. For future research and use of companion robots, it is key to evaluate each robot model and potential use case separately and develop clear routines for how they should be used, and most importantly, let all stakeholders be part of the process. The knowledge contribution is the holistic view of how different actors affect each other when emerging robot technology is introduced in a care environment. Den här avhandlingen utforskar vad som händer när sällskapsrobotar införs på omsorgsboenden för äldre genom att titta på perspektiv från olika intressenter. Nio studier presenteras med kommunala beslutsfattare, vårdpersonal och äldre som deltagare. Studierna har i huvudsak genomförts i fält på särskilda boenden och aktivitetscenter där både kvalitativa- (exempelvis observationer och workshops) och kvantitativa data (enkäter) har samlats in. Avhandlingen visar att sällskapsrobotar verkar vara här för att stanna och att de kan bidra till en högre livskvalitet för vissa äldre. Den visar även på en del utmaningar med en viss diskrepans mellan vad beslutsfattare vill införa och vad personalen har möjlighet att utföra i sitt arbete. För framtida forskning och användning av sällskapsrobotar är det viktigt att utvärdera varje robotmodell och varje användningsområde var för sig och ta fram tydliga rutiner för hur de ska användas, och viktigast av allt, låta alla intressenter vara en del av processen. Kunskapsbidraget med avhandlingen är en helhetssyn på hur olika aktörer påverkar varandra när ny robotteknik introduceras i en vårdmiljö

Exploring C2 Capability and Effectiveness in Challenging Situations

Author: Magdalena Granåsen

Publisher: Linköping University Electronic Press

Published: 2019-05-27

Total Pages: 43

ISBN-13: 917685082X

DOWNLOAD EBOOK →

Modern societies are affected by various threats and hazards, including natural disasters, cyber-attacks, extreme weather events and inter-state conflicts. Managing these challenging situations requires immediate actions, suspension of ordinary procedures, decision making under uncertainty and coordinated action. In other words, challenging situations put high demands on the command and control (C2) capability. To strengthen the capability of C2, it is vital to identify the prerequisites for effective coordination and direction within the domain of interest. This thesis explores C2 capability and effectiveness in three domains: interorganizational crisis management, military command and control, and cyber defence operations. The thesis aims to answer three research questions: (1) What constitutes C2 capability? (2) What constitutes C2 effectiveness? and (3) How can C2 effectiveness be assessed? The work was carried out as two case studies and one systematic literature review. The main contributions of the thesis are the identification of perspectives of C2 capability in challenging situations and an overview of approaches to C2 effectiveness assessment. Based on the results of the three studies, six recurring perspectives of capability in the domains studied were identified: interaction (collaboration), direction and coordination, relationships, situation awareness, resilience and preparedness. In the domains there are differences concerning which perspectives that are most emphasized in order obtain C2 capability. C2 effectiveness is defined as the extent to which a C2 system is successful in achieving its intended result. The thesis discusses the interconnectedness of performance and effectiveness measures, and concludes that there is not a united view on the difference between measures of effectiveness and measures of performance. Different approaches to effectiveness assessment were identified, where assessment may be conducted based on one specific issue, in relation to a defined goal for a C2 function or using a more exploratory approach.

Formal Verification of Tree Ensembles in Safety-Critical Applications

Author: John Törnblom

Publisher: Linköping University Electronic Press

Published: 2020-10-28

Total Pages: 22

ISBN-13: 917929748X

DOWNLOAD EBOOK →

In the presence of data and computational resources, machine learning can be used to synthesize software automatically. For example, machines are now capable of learning complicated pattern recognition tasks and sophisticated decision policies, two key capabilities in autonomous cyber-physical systems. Unfortunately, humans find software synthesized by machine learning algorithms difficult to interpret, which currently limits their use in safety-critical applications such as medical diagnosis and avionic systems. In particular, successful deployments of safety-critical systems mandate the execution of rigorous verification activities, which often rely on human insights, e.g., to identify scenarios in which the system shall be tested. A natural pathway towards a viable verification strategy for such systems is to leverage formal verification techniques, which, in the presence of a formal specification, can provide definitive guarantees with little human intervention. However, formal verification suffers from scalability issues with respect to system complexity. In this thesis, we investigate the limits of current formal verification techniques when applied to a class of machine learning models called tree ensembles, and identify model-specific characteristics that can be exploited to improve the performance of verification algorithms when applied specifically to tree ensembles. To this end, we develop two formal verification techniques specifically for tree ensembles, one fast and conservative technique, and one exact but more computationally demanding. We then combine these two techniques into an abstraction-refinement approach, that we implement in a tool called VoTE (Verifier of Tree Ensembles). Using a couple of case studies, we recognize that sets of inputs that lead to the same system behavior can be captured precisely as hyperrectangles, which enables tractable enumeration of input-output mappings when the input dimension is low. Tree ensembles with a high-dimensional input domain, however, seems generally difficult to verify. In some cases though, conservative approximations of input-output mappings can greatly improve performance. This is demonstrated in a digit recognition case study, where we assess the robustness of classifiers when confronted with additive noise.