Design of Steel Structures (Vol. 1)

Design of Steel Structures (Vol. 1) PDF

Author: Ramchandra

Publisher: Scientific Publishers

Published: 2016-01-01

Total Pages: 1010

ISBN-13: 9386102072

DOWNLOAD EBOOK →

Twelfth edition, 2009 of this book is based on IS: 800-2007 and also newly revised IS: 883-1994 (code of practice for timber structures). New code of practice, IS: 800 is likely to be issued soon. It is likely to introduce ``Limit State Design of Steel Structures''. Authors have distributed the text in thirty four chapters in main text and one chapter `on Location of Shear Centre' in Appendix A. Concept of Shear Centre and bending axis is important and significant and essentially needed to understand simple theory of bending and so also unsymmetrical bending. Complete-text has been updated and new matter added (e.g., elastic buckling, inelastic, stability and instability of columns and compression members, torsional-buckling, torsional-flexural buckling, etc.). Behaviour of web-stiffeners and web-panels specially near the end panels, tension-field action has been first time included to familiarise the students with the concept. Durability of steel members have been emphasized phenomenon of corrosion has been distinctly explained.

Design of Steel Structures (Vol. 2)

Design of Steel Structures (Vol. 2) PDF

Author: Ramchandra

Publisher: Scientific Publishers

Published: 2015-02-01

Total Pages: 1001

ISBN-13: 9386237156

DOWNLOAD EBOOK →

Eight edition of this book is based on Bridge Rules (Adopted in 1941, Revised in 1964 and Reprinted in 1989), and IS: 800-2007. Authors have distributed present text in the edition in thirty two chapters [that is, in Four parts (1) Steel Bridges and Influence Lines Diagrams for axial forces for the members of different types of truss-girders, (2) Special Steel Structures (3) Analysis of Structures specially, the method of tension co-efficients for determinate and indeterminate structures, (4) Aluminium structures. In order to emphasize that similar to various other subjects, this subject is also very vast. Therefore, space steel structures and stressed-skin steel structures have been described special features of this new-edition of this book may be mentioned as under (1) Historical development of different types of steel bridges details of some spans of longest spans of various types of steel bridges, (2) Design of Guyed Steel Chimneys (3) Instantaneous Centre of Rotation (ICR) and Plastic Analysis of Pitched slope (i.e., gable structure) and influences of axial forces and shear forces on the plastic moment of resistance of the member cross-sections.

Design Of Steel Structures

Design Of Steel Structures PDF

Author: Dr. Ramchandra & Virendra Gehlot

Publisher:

Published: 2009-01-01

Total Pages: 981

ISBN-13: 9788172335564

DOWNLOAD EBOOK →

Keeping in view early issue of new code of practice, IS: 800 (likely to introduce `Limit State Design ofSteel Structures') authors have distributed complete text of this subject in thirty-four chapters lookingto importance and significance of `Shear centre of Open Thin-walled Steel sections, authors havedescribed `Location of Shear centre' (a topic of Mechanics of Engineering) in Appendix -A.Special Features of Book

Design of Steel Structures

Design of Steel Structures PDF

Author: Luís Simões da Silva

Publisher: John Wiley & Sons

Published: 2012-01-09

Total Pages: 391

ISBN-13: 3433601100

DOWNLOAD EBOOK →

This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The theoretical basis and checking procedures are closely tied to the Eurocode requirements. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will facilitate the acceptance of the code and provide for a smooth transition from earlier national codes to the Eurocode.

Steel Design 1: Structural Basics

Steel Design 1: Structural Basics PDF

Author: H. H. Snijder

Publisher: John Wiley & Sons

Published: 2020-07-21

Total Pages: 272

ISBN-13: 343361069X

DOWNLOAD EBOOK →

This textbook covers the design and analysis of steel structures for buildings according to EN 1990 (Eurocode 0), EN 1991 (Eurocode 1) and EN 1993 (Eurocode 3). Chapter 1 describes the theory and background of EN 1990 in terms of structural safety, reliability and the design values of resistances and actions. Chapter 2 deals with actions and deformations described in EN 1991. The permanent loads and vari¬able actions and in particular the imposed loads and the snow loads and wind actions are discussed. This chapter also contains three worked examples to determine the actions on a floor in a residential house, the actions on a free-standing platform canopy at a station and the wind actions on the façades of an office building. Chapter 3 is about modelling, discussing the schematisation of the structural system, the joints and the material properties as well as the cross-section properties. Chapter 4 deals with the classification of frames and the various analysis methods for unbraced and braced frames. Chapter 5 then goes deeper into these analysis methods to determine the force distribution and defor¬mations. Chapter 6 deals with the assessment by code-checking of (parts of) the steel structure with EN 1993-1-1 and EN 1993-1-8. At a basic level, the assessment of the resistance of cross-sections, the stability of members under axial forces and the resistance of bolted and welded connections are explained. Chapter 7 discusses in an extensive way the assessment by code-checking of the resistance of cross-sections, both for single and combined internal forces. The principles of the assessment of the resistance of cross-sections according to elastic and plastic theory are also discussed.

Design of Steel Structures

Design of Steel Structures PDF

Author: Elias G. Abu-Saba

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 404

ISBN-13: 1461520797

DOWNLOAD EBOOK →

This book is intended for classroom teaching in architectural and civil engineering at the graduate and undergraduate levels. Although it has been developed from lecture notes given in structural steel design, it can be useful to practicing engineers. Many of the examples presented in this book are drawn from the field of design of structures. Design of Steel Structures can be used for one or two semesters of three hours each on the undergraduate level. For a two-semester curriculum, Chapters 1 through 8 can be used during the first semester. Heavy emphasis should be placed on Chapters 1 through 5, giving the student a brief exposure to the consideration of wind and earthquakes in the design of buildings. With the new federal requirements vis a vis wind and earthquake hazards, it is beneficial to the student to have some under standing of the underlying concepts in this field. In addition to the class lectures, the instructor should require the student to submit a term project that includes the complete structural design of a multi-story building using standard design procedures as specified by AISC Specifications. Thus, the use of the AISC Steel Construction Manual is a must in teaching this course. In the second semester, Chapters 9 through 13 should be covered. At the undergraduate level, Chapters 11 through 13 should be used on a limited basis, leaving the student more time to concentrate on composite construction and built-up girders.

Lanterna Rally - Theme by Grace Themes