-PDF Download- Bolting Reliability For Offshore Oil And Natural Gas Operations EBOOK

Bolting Reliability for Offshore Oil and Natural Gas Operations

Author: National Academies of Sciences, Engineering, and Medicine

Publisher: National Academies Press

Published: 2018-04-26

Total Pages: 147

ISBN-13: 0309465478

The Planning Committee on Connector Reliability for Offshore Oil and Natural Gas Operations held the Workshop on Bolting Reliability for Offshore Oil and Natural Gas Operations in Washington, D.C., on April 10-11, 2017. The workshop was designed to advance and develop a comprehensive awareness of the outstanding issues associated with fastener material failures and equipment reliability issues. Speakers and participants were also encouraged to discuss possible paths for ameliorating risks associated with fasteners used for subsea critical equipment in oil and gas operations. This publication summarizes the presentations and discussions from the workshop.

High-Performance Bolting Technology for Offshore Oil and Natural Gas Operations

Author: National Academies of Sciences, Engineering, and Medicine

Publisher: National Academies Press

Published: 2018-06-12

Total Pages: 271

ISBN-13: 0309472458

DOWNLOAD EBOOK →

Commercially significant amounts of crude oil and natural gas lie under the continental shelf of the United States. Advances in locating deposits, and improvements in drilling and recovery technology, have made it technically and economically feasible to extract these resources under harsh conditions. But extracting these offshore petroleum resources involves the possibility, however remote, of oil spills, with resulting damage to the ocean and the coastline ecosystems and risks to life and limb of those performing the extraction. The environmental consequences of an oil spill can be more severe underwater than on land because sea currents can quickly disperse the oil over a large area and, thus, cleanup can be problematic. Bolted connections are an integral feature of deep-water well operations. High-Performance Bolting Technology for Offshore Oil and Natural Gas Operations summarizes strategies for improving the reliability of fasteners used in offshore oil exploration equipment, as well as best practices from other industrial sectors. It focuses on critical boltingâ€"bolts, studs, nuts, and fasteners used on critical connections.

Bolting Reliability for Offshore Oil and Natural Gas Operations

Author: National Academies of Sciences, Engineering, and Medicine

Publisher: National Academies Press

Published: 2018-03-26

Total Pages: 147

ISBN-13: 0309465508

DOWNLOAD EBOOK →

High-Performance Bolting Technology for Offshore Oil and Natural Gas Operations

Author: National Academies of Sciences, Engineering, and Medicine

Publisher: National Academies Press

Published: 2018-07-12

Total Pages: 271

ISBN-13: 0309472423

DOWNLOAD EBOOK →

Handbook of Offshore Oil and Gas Operations

Author: James G. Speight

Publisher: Elsevier

Published: 2014-10-22

Total Pages: 444

ISBN-13: 0080878199

DOWNLOAD EBOOK →

Handbook of Offshore Oil and Gas Operations is an authoritative source providing extensive up-to-date coverage of the technology used in the exploration, drilling, production, and operations in an offshore setting. Offshore oil and gas activity is growing at an expansive rate and this must-have training guide covers the full spectrum including geology, types of platforms, exploration methods, production and enhanced recovery methods, pipelines, and envinronmental managment and impact, specifically worldwide advances in study, control, and prevention of the industry's impact on the marine environment and its living resources. In addition, this book provides a go-to glossary for quick reference. Handbook of Offshore Oil and Gas Operations empowers oil and gas engineers and managers to understand and capture on one of the fastest growing markets in the energy sector today. Quickly become familiar with the oil and gas offshore industry, including deepwater operations Understand the full spectrum of the business, including environmental impacts and future challenges Gain knowledge and exposure on critical standards and real-world case studies

Macondo Well Deepwater Horizon Blowout

Author: National Research Council

Publisher: National Academies Press

Published: 2012-03-02

Total Pages: 236

ISBN-13: 0309221412

DOWNLOAD EBOOK →

The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.

An Introduction to the Design and Behavior of Bolted Joints, Revised and Expanded

Author: John Bickford

Publisher: Routledge

Published: 2018-05-11

Total Pages: 648

ISBN-13: 1351466844

DOWNLOAD EBOOK →

Offering a broad-based review of the factors affecting the design, assembly and behaviour of bolted joints and their components in all industries, this work details various assembly options as well as specific failure modes and strategies for their avoidance. This edition features material on: the contact stresses between bolt head or nut face and the joint; thread forms, series and classes; the stiffness of raised face flange joints; and more.

A Practical Guide to Piping and Valves for the Oil and Gas Industry

Author: Karan Sotoodeh

Publisher: Gulf Professional Publishing

Published: 2021-01-12

Total Pages: 986

ISBN-13: 012824187X

DOWNLOAD EBOOK →

A Practical Guide to Piping and Valves for the Oil and Gas Industry covers how to select, test and maintain the right oil and gas valve. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection. Covering both onshore and offshore projects, the book also gives an introduction to the most common types of corrosion in the oil and gas industry, including CO2, H2S, pitting, crevice, and more. A model to evaluate CO2 corrosion rate on carbon steel piping is introduced, along with discussions on bulk piping components, including fittings, gaskets, piping and flanges. Rounding out with chapters devoted to valve preservation to protect against harmful environments and factory acceptance testing, this book gives engineers and managers a much-needed tool to better understand today’s valve technology. Presents oil and gas examples and challenges relating to valves, including many illustrations from valves in different stages of projects Helps readers understand valve materials, testing, actuation, packing and preservation, also including a new model to evaluate CO2 corrosion rates on carbon steel piping Presents structured valve selection tables in each chapter to help readers pick the right valve for the right project

Metallurgy and Corrosion Control in Oil and Gas Production

Author: Robert Heidersbach

Publisher: John Wiley & Sons

Published: 2018-09-17

Total Pages: 368

ISBN-13: 1119252385

DOWNLOAD EBOOK →

Details the proper methods to assess, prevent, and reduce corrosion in the oil industry using today's most advanced technologies This book discusses upstream operations, with an emphasis on production, and pipelines, which are closely tied to upstream operations. It also examines protective coatings, alloy selection, chemical treatments, and cathodic protection—the main means of corrosion control. The strength and hardness levels of metals is also discussed, as this affects the resistance of metals to hydrogen embrittlement, a major concern for high-strength steels and some other alloys. It is intended for use by personnel with limited backgrounds in chemistry, metallurgy, and corrosion and will give them a general understanding of how and why corrosion occurs and the practical approaches to how the effects of corrosion can be mitigated. Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition updates the original chapters while including a new case studies chapter. Beginning with an introduction to oilfield metallurgy and corrosion control, the book provides in-depth coverage of the field with chapters on: chemistry of corrosion; corrosive environments; materials; forms of corrosion; corrosion control; inspection, monitoring, and testing; and oilfield equipment. Covers all aspects of upstream oil and gas production from downhole drilling to pipelines and tanker terminal operations Offers an introduction to corrosion for entry-level corrosion control specialists Contains detailed photographs to illustrate descriptions in the text Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition is an excellent book for engineers and related professionals in the oil and gas production industries. It will also be an asset to the entry-level corrosion control professional who may have a theoretical background in metallurgy, chemistry, or a related field, but who needs to understand the practical limitations of large-scale industrial operations associated with oil and gas production.

Project Management in the Oil and Gas Industry

Author: Mohamed A. El-Reedy

Publisher: John Wiley & Sons

Published: 2016-02-19

Total Pages: 336

ISBN-13: 1119084105

DOWNLOAD EBOOK →

Oil and gas projects have special characteristics that need a different technique in project management. The development of any country depends on the development of the energy reserve through investing in oil and gas projects through onshore and offshore exploration, drilling, and increasing facility capacities. Therefore, these projects need a sort of management match with their characteristics, and project management is the main tool to achieving a successful project. Written by a veteran project manager who has specialized in oil and gas projects for years, this book focuses on using practical tools and methods that are widely and successfully used in project management for oil and gas projects. Most engineers study all subjects, but focus on project management in housing projects, administration projects, and commercial buildings or other similar projects. However, oil and gas projects have their own requirements and characteristics in management from the owners, engineering offices, and contractors’ side. Not only useful to graduating engineers, new hires, and students, this volume is also an invaluable addition to any veteran project manager’s library as a reference or a helpful go-to guide. Also meant to be a refresher for practicing engineers, it covers all of the project management subjects from an industrial point of view specifically for petroleum projects, making it the perfect desktop manual. Not just for project managers and students, this book is helpful to any engineering discipline or staff in sharing or applying the work of a petroleum project and is a must-have for anyone working in this industry.