-PDF Download- Bogatins Practical Guide To Transmission Line Design And Characterization For Signal Integrity Applications EBOOK

Bogatin’s Practical Guide to Transmission Line Design and Characterization for Signal Integrity Applications

Author: Eric Bogatin

Publisher: Artech House

Published: 2020-05-31

Total Pages: 603

ISBN-13: 1630816922

This multimedia eBook establishes a solid foundation in the essential principles of how signals interact with transmission lines, how the physical design of interconnects affects transmission line properties, and how to interpret single-ended and differential time domain reflection (TDR) measurements to extract important figures of merits and avoid common mistakes. This book presents an intuitive understanding of transmission lines. Instructional videos are provided in every chapter that cover important aspects of the interconnect design and characterization process. This video eBook helps establish foundations for designing and characterizing the electrical properties of interconnects to explain in a simplified way how signals propagate and interact with interconnects and how the physical design of transmission structures will impact performance. Never be intimidated by impedance or differential pairs again.

Signal Integrity Characterization Techniques

Author: Mike Resso

Publisher: Intl. Engineering Consortiu

Published: 2009

Total Pages: 812

ISBN-13: 9781931695930

DOWNLOAD EBOOK →

Cogently addressing the future of signal integrity and the effect it will have on the data transmission industry as a whole, this all-inclusive guide addresses a wide array of technologies, from traditional digital data transmission to microwave measurements, and accessibly examines the gap between the two. Focusing on real world applications and providing a wide array of case studies that show how each technology can be used—from backplane design challenges to advanced error correction techniques—this guide addresses many of today’s high-speed technologies while also providing excellent insight into their future direction. With numerous valuable lessons pertaining to the signal integrity industry, this resource is the ultimate must-read guide for any specialist in the design engineering field.

Signal and Power Integrity--simplified

Author: Eric Bogatin

Publisher: Pearson Education

Published: 2010

Total Pages: 793

ISBN-13: 0132349795

DOWNLOAD EBOOK →

With the inclusion of the two new hot topics in signal integrity, power integrity and high speed serial links, this book will be the most up to date complete guide to understanding and designing for signal integrity.

Bogatin's Practical Guide to Prototype Breadboard and PCB Design

Author: Eric Bogatin

Publisher: Artech House

Published: 2021-09-30

Total Pages: 500

ISBN-13: 1630818488

DOWNLOAD EBOOK →

Printed circuit boards (PCB) are at the heart of every electronic product manufactured today. Yet, engineers rarely learn to design PCBs from a class or course. They learn it by doing, by reading app notes, watching YouTube videos and sitting by the side of an experienced engineer. This book is the foundation building book for all engineers starting out to design PCBs. It teaches good habits designing a PCB, first for connectivity, and secondly, introduces the four most important principles to reduce noise. A seven-step process is presented: developing a plan of record, creating a Bill of Materials, completing the schematic, completing the layout, completing the assembly, conducting bring up and troubleshooting and documenting the project. Each step is developed in detail. In particular, the emphasis in this book is on risk management: what can be done at each step of the process to reduce the risk of a hard-error which requires a complete re-spin, or a soft error, which requires some sort of on-the-fly repair. After connectivity is designed, it’s important to develop good habits to minimize the potential noise from ground bounce, power rail stitching noise, stack up design and reducing switching noise in signal paths. These techniques apply to all designs from 2-layer to 8-layer and more, for bandwidths below 200 MHz. The best practices for manual lead-free soldering are presented so that everyone can become a soldering expert. The best measurement practices using common lab instruments such as the DMM, the constant current/constant voltage power supply, and oscilloscopes are presented so that common artifacts are minimized. Features in the design that help you find design or assembly errors quickly and the troubleshooting techniques to find and fix problems are introduced. Applying the habits presented in this book will help every engineer design their next circuit board faster, with less chance of an unexpected problem, with the lowest noise. This textbook will also have embedded videos to visually demonstrate many of the hands-on processes introduced in this book.

S-Parameters for Signal Integrity

Author: Peter J. Pupalaikis

Publisher: Cambridge University Press

Published: 2020-02-06

Total Pages: 667

ISBN-13: 1108808344

DOWNLOAD EBOOK →

Master the usage of s-parameters in signal integrity applications and gain full understanding of your simulation and measurement environment with this rigorous and practical guide. Solve specific signal integrity problems including calculation of the s-parameters of a network, linear simulation of circuits, de-embedding, and virtual probing, all with expert guidance. Learn about the interconnectedness of s-parameters, frequency responses, filters, and waveforms. This invaluable resource for signal integrity engineers is supplemented with the open-source software SignalIntegrity, a Python package for scripting solutions to signal integrity problems.

High-Speed Digital System Design

Author: Stephen H. Hall

Publisher: Wiley-IEEE Press

Published: 2000-09-08

Total Pages: 376

ISBN-13:

DOWNLOAD EBOOK →

A cutting-edge guide to the theory and practice of high-speed digital system design An understanding of high-speed interconnect phenomena is essential for digital designers who must deal with the challenges posed by the ever-increasing operating speeds of today's microprocessors. This book provides a much-needed, practical guide to the state of the art of modern digital system design, combining easily accessible explanations with immensely useful problem-solving strategies. Written by three leading Intel engineers, High-Speed Digital System Design clarifies difficult and often neglected topics involving the effects of high frequencies on digital buses and presents a variety of proven techniques and application examples. Extensive appendices, formulas, modeling techniques as well as hundreds of figures are also provided. Coverage includes: * A thorough introduction to the digital aspects of basic transmission line theory * Crosstalk and nonideal transmission line effects on signal quality and timings * The impact of packages, vias, and connectors on signal integrity * The effects of nonideal return current paths, high frequency power delivery, and simultaneous switching noise * Explanations of how driving circuit characteristics affect the quality of the digital signal * Digital timing analysis at the system level that incorporates high-speed signaling effects into timing budgets * Methodologies for designing high-speed buses and handling the very large number of variables that affect interconnect performance * Radiated emission problems and how to minimize system noise * The practical aspects of making measurements in high-speed digital systems

Introduction to Radar Using Python and MATLAB

Author: Lee Andrew (Andy) Harrison

Publisher: Artech House

Published: 2019-10-31

Total Pages: 464

ISBN-13: 1630815993

DOWNLOAD EBOOK →

This comprehensive resource provides readers with the tools necessary to perform analysis of various waveforms for use in radar systems. It provides information about how to produce synthetic aperture (SAR) images by giving a tomographic formulation and implementation for SAR imaging. Tracking filter fundamentals, and each parameter associated with the filter and how each affects tracking performance are also presented. Various radar cross section measurement techniques are covered, along with waveform selection analysis through the study of the ambiguity function for each particular waveform from simple linear frequency modulation (LFM) waveforms to more complicated coded waveforms. The text includes the Python tool suite, which allows the reader to analyze and predict radar performance for various scenarios and applications. Also provided are MATLAB® scripts corresponding to the Python tools. The software includes a user-friendly graphical user interface (GUI) that provides visualizations of the concepts being covered. Users have full access to both the Python and MATLAB source code to modify for their application. With examples using the tool suite are given at the end of each chapter, this text gives readers a clear understanding of how important target scattering is in areas of target detection, target tracking, pulse integration, and target discrimination.

Principles of Power Integrity for PDN Design--Simplified

Author: Larry D. Smith

Publisher: Prentice Hall

Published: 2017-04-06

Total Pages: 831

ISBN-13: 0132735628

DOWNLOAD EBOOK →

Consistently Design PDNs That Deliver Reliable Performance at the Right Cost Too often, PDN designs work inconsistently, and techniques that work in some scenarios seem to fail inexplicably in others. This book explains why and presents realistic processes for getting PDN designs right in any new product. Drawing on 60+ years of signal and power integrity experience, Larry Smith and Eric Bogatin show how to manage noise and electrical performance, and complement intuition with analysis to balance cost, performance, risk, and schedule. Throughout, they distill the essence of complex real-world problems, quantify core principles via approximation, and apply them to specific examples. For easy usage, dozens of key concepts and observations are highlighted as tips and listed in quick, chapter-ending summaries. Coverage includes • A practical, start-to-finish approach to consistently meeting PDN performance goals • Understanding how signals interact with interconnects • Identifying root causes of common problems, so you can avoid them • Leveraging analysis tools to efficiently explore design space and optimize tradeoffs • Analyzing impedance-related properties of series and parallel RLC circuits • Measuring low impedance for components and entire PDN ecologies • Predicting loop inductance from physical design features • Reducing peak impedances from combinations of capacitors • Understanding power and ground plane properties in the PDN interconnect • Taming signal integrity problems when signals change return planes • Reducing peak impedance created by on-die capacitance and package lead inductance • Controlling transient current waveform interactions with PDN features • Simple spreadsheet-based analysis techniques for quickly creating first-pass designs This guide will be indispensable for all engineers involved in PDN design, including product, board, and chip designers; system, hardware, component, and package engineers; power supply designers, SI and EMI engineers, sales engineers, and their managers.

In-Band Full-Duplex Wireless Systems Handbook

Author: Kenneth E Kolodziej

Publisher: Artech House

Published: 2021-03-31

Total Pages: 440

ISBN-13: 1630817902

DOWNLOAD EBOOK →

Many wireless systems could benefit from the ability to transmit and receive on the same frequency at the same time, which is known as In-Band Full-Duplex (IBFD). This technology could lead to enhanced spectral efficiency for future wireless networks, such as fifth-generation New Radio (5G NR) and beyond, and could enable capabilities and applications that were previously considered impossible, such as IBFD with phased array systems. In this exciting new book, experts from industry, academic, and federal research institutions discuss the various approaches that can be taken to suppress the inherent self-interference that is generated in IBFD systems. Both static and adaptive techniques that span across the propagation, analog and digital domains are presented. Details and measured results that encompass high-isolation antenna designs, RF, and photonic cancellation as well as signal processing approaches, which include beamforming and linear/non-linear equalization are detailed. Throughout this book, state-of-the-art IBFD systems that utilize these technologies will be provided as practical examples for various applications. Expert IBFD perspectives from multiple research organizations and companies, which would provide readers with the most accurate state-of-the-art approaches. This is the first book that dives into both the techniques that make IBFD systems possible as well as several different applications that use IBFD technology.

PCB Design Guide to Via and Trace Currents and Temperatures

Author: Douglas Brooks

Publisher: Artech House

Published: 2021-02-28

Total Pages: 246

ISBN-13: 1630818615

DOWNLOAD EBOOK →

A very important part of printed circuit board (PCB) design involves sizing traces and vias to carry the required current. This exciting new book will explore how hot traces and vias should be and what board, circuit, design, and environmental parameters are the most important. PCB materials (copper and dielectrics) and the role they play in the heating and cooling of traces are covered. The IPC curves found in IPC 2152, the equations that fit those curves and computer simulations that fit those curves and equations are detailed. Sensitivity analyses that show what happens when environments are varied, including adjacent traces and planes, changing trace lengths, and thermal gradients are presented. Via temperatures and what determines them are explored, along with fusing issues and what happens when traces are overloaded. Voltage drops across traces and vias, the thermal effects going around right-angle corners, and frequency effects are covered. Readers learn how to measure the thermal conductivity of dielectrics and how to measure the resistivity of copper traces and why many prior attempts to do so have been doomed to failure. Industrial CT Scanning, and whether or not they might replace microsections for measuring trace parameters are also considered.